Table of Contents
Advertisement
1.2
1.3
1.4
1.5
1.6
1.7
installation
Your dryer contains an extendible vent hose. We recommend you always use it to
avoid condensation.
Simply pull the hose from the exhaust outlet at the bottom right hand corner at the
back of your dryer and lead the hose to a partly open door or window. (A
permanent connection may be made with the optional Wall/Window Vent Kit). Do
not use the dryer in a confined space with the vent hose retracted.
Make sure that the air inlets at the back are not blocked and do not allow fluff to
accumulate around your dryer.
Place the filter in its operating position as shown in diagram below. It slides down
into the recess to a level which allows the door to close above it.
If you wish to change the side on which your door opens see instructions on back
page.
Remove any dust by wiping the drum and door with a damp cloth. Any initial smell
—
from the heater should disappear after the first period of heating.
The dryer must be connected to its own socket. Do not use a two-way adaptor.
Advertisement
Table of Contents
