Sio Configuration - Gigabyte H223-S10-AAP1 User Manual

5-2-3 SIO Configuration

Parameter
AMI SIO Driver Version
Super IO Chip Logical
Device(s) Configuration
[*Active*] Serial Port
Description
Displays the AMI SIO driver version information.
Press [Enter] to configure advanced items.
Use This Device
Š
– When set to Enabled allows you to configure the serial port settings.
When set to Disabled, displays no configuration for the serial port.
– Options available: Enabled, Disabled. Default setting is Enabled.
Logical Device Settings/Current:
Š
– Displays the serial port base I/O address and IRQ.
Possible:
Š
– Configures the serial port base I/O address and IRQ.
Use Automatic Settings
IO=3F8h; IRQ=4; DMA;
IO=3F8h; IRQ=4; DMA;
IO=2F8h; IRQ=4; DMA;
IO=3E8h; IRQ=4; DMA;
IO=2E8h; IRQ=4; DMA;
Default setting is Use Automatic Settings.
BIOS Setup
- 53 -