Table of Contents
Advertisement
3-4
Removing and Installing the Fan Duct
Follow these instructions to remove/install the fan duct:
1.
Remove the two screws securing the fan ducts.
2.
Lift up to remove the fan ducts
3.
To install the fan duct, align the fan duct with the guiding groove. Push down the fan duct into
chassis until its firmly seats, then install the four screws to secure the fan ducts in place.
NOTE! Make sure the edge of the fanduct is placed under the riser bracket.
2
System Hardware Installation
- 27 -
1
1
Advertisement
Table of Contents
