Aiwa NSX-SZ70 Operating Instructions Manual page 26

SPECIFICATIONS
Main unit CX-NSZ70
FM tuner section
Tuning range
Usable sensivity (IHF)
Antenna terminals
87.5 MHz to 108 MHz
13.2 dBf
75 ohms (unbalanced)
MW tuner section
Tuning range 531 kHz to 1602 kHz (9 kHz step)
530 kHz to 1710 kHz (10 kHz step)
350 pV/m
Loop antenna
Usable sensitivity
Antenna
LW tuner section
Tuning range
Usable sensitivity
Antenna
144 kHz to 290 kHz
1400 pV/m
Loop antenna
Amplifier section
Mid-high frequency amplifier
Power output Rated: 25 W + 25 W (8 ohms, T.H.D.
1%, 1 kHz/DIN 45500)
Reference: 30 W + 30 W (8 ohms,
T.H.D. 10 %, 1 KHz/DIN 45324)
DIN MUSIC POWER: 60 W + 60
W
Total harmonic distortion 0.1 % (10 W, 1 kHz, 8 ohms, DIN
AUDIO)
Low frequency amplifier
Power output Rated: 75 W + 75 W (6 ohms, T.H.D.
1%, 130 Hz/DIN 45500)
Reference: 90 W + 90 W (6 ohms,
T.H.D. 10 %, 130 Hz/DIN 45324)
DIN MUSIC POWER: 170 W + 170
WwW
Total harmonic distortion 0.1 % (35 W, 130 Hz, 6 ohms, DIP
AUDIO)
Inputs VIDEO/AUX: 316 mV (adjustable'
MD: 316 mV (adjustable)
MIC: 1.8 mV (10 k ohms)
SPEAKERS HIGH FREQ:
accept speakers of 8 ohms or mort
SPEAKERS LOW FREQ:
accept speakers of 6 ohms or more
SURROUND SPEAKERS:
accept speakers of 8 ohms to 16
ohms
LINE OUT: 210 mV
PHONES (stereo jack): accepts
headphones of 32 ohms or more
Outputs
Cassette deck section
Track format
Frequency response
4 tracks, 2 channels stereo
CrO2 tape: 50 Hz — 16000 Hz
Normal tape: 50 Hz ~ 15000 Hz
Signal-to-noise ratio 60 dB (Dolby B NR ON, CrOz tape
peak level)
Recording system AC bias
Heads Deck 1: Playback head x 1
Deck 2:Recording/playback hea
x 1, erase head x 1
Compact disc player section
Laser Semiconductor laser (A = 780 nm)
D-A converter 1 bit dual
Signal-to-noise ratio 85 dB (1 kHz, 0 dB)
Harmonic distortion 0.05 % (1 kHz, 0 dB)
Wow and flutter Unmeasurable
26 ENGLISH
General
Power requirements 230 V AC, 50 Hz
Power consumption 170W
Power consumption in
standby mode
If the power-economizing mode is
ECO OFF: 24 W
If the power-economizing mode is
ECO ON or ECO AUTO: 0.9 W
Dimensions (W x H x D) 260 x 330 x 360 mm
Weight 8.9 kg
Speaker system SX-WNSZ70
Speaker system 3 way, built-in subwoofer (magnetic
shielded type)
Subwoofer:
160 mm cone type
Full range:
100 mm cone type
Super tweeter:
20 mm ceramic type
6 ohms/8 ohms
Speaker units
Impedance
Sensitivity 87 dB/W/m
Dimensions (W x H x D) 240 x 324 x 281 mm
Weight 5.2 kg
Specifications and external appearance are subject to change without
notice.
BBE systeu
The word "BBE" and the "BBE symbol" are trademarks of BBE
Sound, Inc.
Under license from BBE Sound, Inc.
DOLBY NR
Dolby noise reduction manufactured under license from Dolby
Laboratories Licensing Corporation.
"DOLBY" and the double-D symbol OO are trademarks of Dolby