Bosch WORCESTER Greenstar Danesmoor 18/25 Installation, Commissioning And Servicing Instruction Manual page 37

Pre-wired remote 2 or 3 port valve control set using remote programmer
•
= EARTH
•
= NEUTRAL
•
= SWITCHED LIVE
OUTSIDE BOILER
INSIDE BOILER
Fig. 61
Greenstar Danesmoor Kitchen ErP+ and Kitchen System
O
Key to components:
[O]
> Mains wiring 230V 50 Hz
> Hot water tank thermostat
> Room thermostat
> System water valves
> Circulating pump
> External programmer
[F]
[G]
[H]
Remote 10 way junction box (O) requirements:
> The junction box (O) must be a terminal block type,
current rated to at least 5 amps.
> A 5 amp fuse must be fitted to the mains supply.
> The junction box (O) must be fitted externally to the boiler.
NOTE: A frost thermostat can also be connected to the remote
N1 1 2 3 4 5 6
ErP+ - 6 720 821 686 (2018/04)
Remote junction box (10 way) to connect the following:
Internal programmer connector
Terminal connector block
Link connector
junction box if required.
G
6a
7 8 9 10
H
Installation
F
6720808218-49.1Wo
37