Table of Contents
Advertisement
Standby Settings
• Standby Monitor Out: Selecting On enables the function. The projector can output a
VGA signal when it is in standby mode and the PC and MONITOR OUT jacks are
correctly connected to devices.
• Audio Pass Through: The projector can play sound when it is in standby mode and
the corresponding jacks are correctly connected to devices.
Reset Settings
Returns all settings to the factory preset values.
Note
•
The following settings will not be reset: User 1, User 2, Projector Installation, High
Altitude Mode, Security Settings and Baud Rate.
INFORMATION
Native Resolution
Shows the native resolution of the projector.
Current System Status
• Source: Shows the current signal source.
• Color Mode: Shows the selected mode in the PICTURE menu.
• Resolution: Shows the native resolution of the input signal.
• Lamp Mode: Shows the current lamp mode.
• 3D Format: Shows the current 3D mode.
• Color System: Shows input system format RGB or YUV.
• Equivalent lamp hour: Displays the number of hours the lamp has been used.
• Firmware Version: Shows firmware version.
27
Advertisement
Table of Contents
