Table of Contents
Advertisement
PICTURE
Color Mode
Pre-defined display modes are provided so you can optimize your projector image set-
up to suit your program type.
Reference Mode
Selects a display mode that best suits your need for the image quality and further fine-
tune the image based on the selections listed on the same page below.
Brightness
Adjusts the brightness of the image.
Contrast
Adjusts the degree of difference between dark and light in the image.
Color
Adjusts the color saturation level -- the amount of each color in a video image.
Tint
Adjusts the red and green color tones of the image.
Sharpness
Adjusts the image to make it look sharper or softer.
Brilliant Color
Selecting On enables a greater brightness increase in mid-tone images.
Color Temperature
The options available for color temperature settings vary according to the signal type
selected.
• Cool: Makes images appear bluish white.
• Normal: Maintains normal colorings for white.
• Warm: Makes images appear reddish white.
Color Temperature Fine Tuning
Sets a preferred color temperature.
• R Gain/G Gain/B Gain: Adjusts the contrast levels of Red, Green, and Blue.
• R Offset/G Offset/B Offset: Adjusts the brightness levels of Red, Green, and Blue.
Color Management
The Color Management provides six sets (RGBCMY) of colors to be adjusted. When
you select each color, you can independently adjust its range, hue, saturation and
gain according to your preference.
• Primary Color: selects a color from among Red, Yellow, Green, Cyan, Blue, or
Magenta.
• Hue: Increases in the range will include colors consisted of more proportions of its
two adjacent colors.
• Saturation: Is the amount of that color in a video picture. Lower settings produce
less saturated colors.
• Gain: The contrast level of the primary color you select will be affected.
24
Advertisement
Table of Contents
