Vivitek DH286-ST Series User Manual page 30

Reset Color Settings
Resets current or all color modes.
• Current: returns current display mode to the factory preset settings.
• All: returns color mode settings to the factory preset settings.
SOURCE
Auto Source
If you want the projector to automatically search for the signals, be sure the Auto
Source function in the SOURCE menu is On (which is the default of this projector).
SETTINGS 1
Presentation Timer
Reminds the presenter to finish the presentation within a certain time frame.
Language
Sets the language for the On-Screen Display (OSD) menus.
Projection
The projector can be installed on a ceiling or behind a screen, or with one or more
mirrors.
Menu Settings
• Menu Display Time: Sets the length of time the OSD will remain active after your
last key press. The range is from 5 to 30 seconds in 5-second increments.
• Menu Position: Sets the On-Screen Display (OSD) menu position.
• Reminder Message: Sets whether to display the reminder message.
Operation Settings
• Direct Power On: Selecting On enables the function.
• Signal Power On: Selecting On the projector will turn on automatically when VGA
signal is detected. Selecting Off the projector has to be turnned on manually (by
keypad or remote).
• Auto Power Off: Allows the projector to turn off automatically if no input signal is
detected after a set period of time.
• Quick Cooling: Selecting On enables the function and the projector cooling time will
be shortened to a few seconds. If you attempt to restart the projector right after the
quick cooling process, it may not be turned on successfully and will rerun its cooling
fans.
• Instant Restart: When instant restart is on, users can restart projector immediately
within 90 secs after turning off projector.
• Blank Timer: Sets the image blank time when the Blank feature is activated, once
elapsed the image will return to the screen.
• Sleep Timer: Sets the auto-shutdown timer. The timer can be set to a value
between 30 minutes and 12 hours.
25