Changing The Activated Programme End Time; Adding Laundry; Cancelling The Programme; Unloading The Laundry - Bosch WTN85201ES User Manual And Installation Instructions

Table of Contents

Advertisement

a The display shows the programme
duration or the programme end
time.
a After the programme has ended,
the display shows: "End".
Note: If "Hot" appears, the appliance
cools the laundry.
When "Hot" goes out, the laundry has
cooled down.
12.6 Changing the activated
programme end time
You can repeatedly change the set
and activated programme end time
before starting the programme.
Requirements
¡ The programme is set.
→ "Setting a programme", Page 28
¡ The programme end time is set
and activated.
→ "Buttons", Page 22
Press Inicio/Pausa + Carga
1.
The activated programme end time
is paused.
Press Termin.
2.
shows the required programme
end time.
Press Inicio/Pausa + Carga
3.
The changed programme end time
is activated.
12.7 Adding laundry
After the programme starts, you can
remove or add laundry at any time.
Press Inicio/Pausa + Carga
1.
The cooling process starts auto-
matically after approximately 30
seconds and cools down the laun-
dry while the drum is rotating. If
you want to avoid or cancel the
cooling process, open the door.
→ "Display", Page 20
Open the door.
2.
Add or remove laundry.
3.
.
until the display
.
.
Close the door.
4.
Press Inicio/Pausa + Carga
5.
12.8 Cancelling the pro-
gramme
Press Inicio/Pausa + Carga
1.
Open the door.
2.
Remove the laundry.
3.
→ "Unloading the laundry",
Page 29
12.9 Unloading the laundry
Open the door.
1.
Remove the laundry from the
2.
drum.
12.10 Switching off the appli-
ance
Turn the programme selector to
12.11 Fluff filter
During drying, fluff from the laundry is
collected in the fluff filter. The fluff fil-
ter protects the appliance from fluff.
Cleaning the fluff filter
If the drying programme has finished
or the display shows a notification
while the appliance is in operation,
clean the fluff filter.
Note: If you do not clean the appli-
ance as described, the appliance's
functionality may be impaired.
Requirements
¡ The display shows the following
after drying: "End"
¡ or the display shows the following
during operation:
Open the door.
1.
Basic operation en
.
.
.
.
29

Advertisement

Table of Contents
loading

Table of Contents