Table of Contents
Advertisement
en operation
If required, adjust the programme
2.
settings.
12.3 Loading laundry
Note: To prevent creasing, note the
maximum load for the programmes.
→ "Programmes", Page 24
Requirements
¡ The laundry is prepared and sor-
ted.
→ "Laundry", Page 27
¡ The drum is empty.
Open the door.
1.
Place the laundry in the drum.
2.
Close the door.
3.
Ensure that there is no laundry
trapped in the door.
12.4 Starting the programme
Requirement: A programme is set.
→ "Setting a programme", Page 27
Press Start/Pause
▶
a The display shows the programme
duration or the programme end
time.
a After the programme has ended,
the display shows: "End" .
12.5 Changing the activated
programme end time
You can repeatedly change the set
and activated programme end time
before starting the programme.
Requirements
¡ The programme is set.
→ "Setting a programme", Page 27
¡ The programme end time is set
and activated.
→ "Buttons", Page 22
Press Start/Pause
1.
The activated programme end time
is paused.
28
.
.
Press Finished in
2.
play shows the required pro-
gramme end time.
Press Start/Pause
3.
The changed programme end time
is activated.
12.6 Adding laundry
After the programme starts, you can
remove or add laundry at any time.
Press Start/Pause
1.
Open the door.
2.
Add or remove laundry.
3.
Close the door.
4.
Press Start/Pause
5.
12.7 Cancelling the pro-
gramme
Press Start/Pause
1.
Open the door.
2.
Remove the laundry.
3.
→ "Unloading the laundry",
Page 28
12.8 Unloading the laundry
Open the door.
1.
Remove the laundry from the
2.
drum.
12.9 Switching off the appli-
ance
Turn the programme selector to
▶
Off .
until the dis-
.
.
.
.
Advertisement
Table of Contents
