Table of Contents
Advertisement
en operation
a The display shows the programme
duration or the programme end
time.
a After the programme has ended,
the display shows: "End".
12.6 Changing the activated
programme end time
You can repeatedly change the set
and activated programme end time
before starting the programme.
Requirements
¡ The programme is set.
→ "Setting a programme", Page 27
¡ The programme end time is set
and activated.
→ "Buttons", Page 22
Press Start/Pause
1.
The activated programme end time
is paused.
Press Ready In
2.
shows the required programme
end time.
Press Start/Pause
3.
The changed programme end time
is activated.
12.7 Adding laundry
After the programme starts, you can
remove or add laundry at any time.
Press Start/Pause
1.
Open the door.
2.
Add or remove laundry.
3.
Close the door.
4.
Press Start/Pause
5.
12.8 Cancelling the pro-
gramme
Press Start/Pause
1.
Open the door.
2.
Remove the laundry.
3.
→ "Unloading the laundry",
Page 28
28
.
until the display
.
.
.
.
12.9 Unloading the laundry
Open the door.
1.
Remove the laundry from the
2.
drum.
12.10 Switching off the appli-
ance
Turn the programme selector to
▶
Off.
12.11 Fluff filter
During drying, fluff from the laundry is
collected in the fluff filter. The fluff fil-
ter protects the appliance from fluff.
Cleaning the fluff filter
If the drying programme has finished
or the display shows a notification
while the appliance is in operation,
clean the fluff filter.
Note: If you do not clean the appli-
ance as described, the appliance's
functionality may be impaired.
Requirements
¡ The display shows the following
after drying: "End"
¡ or the display shows the following
during operation:
Open the door.
1.
Remove the fluff from the door.
2.
.
Advertisement
Table of Contents
