Table of Contents
Advertisement
chek
(13)dZE9-OXA
(on)ze9-Oxad
Ofer atarcyeitteyay—)
You can attach an optional LCD color monitor to the
accessory shoe of the camera head.
"—-"Accessory shoe adaptor
onnection screw
(not supplied)»
LCD color monitor
Intertace cable
Yellow connector
MONITOR OUT
connector
contact your Sony service representative.
[ a) When you need the connection screw,
Both the camera video and the character information as
displayed on the viewfinder screen are output from the
MONITOR OUT connector to the LCD monitor. The
zebra pattern and markers are not output to the LCD
monitor.
For details of the LCD monitor, see the instructions
provided with it.
Using the optional CA-537/537P or CA-327/327P
Camera Adaptor and a camera cable, you can connect
a portable VTR. Set the VTR selector switch on the
camera adaptor according to the VTR connected.
fusing a VTR from another manufacturer, consult your
sales representative or supplier.
Checks before making connections
Check first that the video camera, camera adaptor,
VTR, and other devices are all powered off.
Making connections
Using a camera cable, connect the VTR/CCU/CMA
connector on the camera adaptor to the camera input
connector of the VTR.
'
Example: Connecting a BVW-50/50P Portable VTR to
a CA-537/537P Camera Adaptor
CA-537/537P
Camera Adaptor
VTR/CCUICMA
DXC-637/637P
CCZ-A Camera Cable
26-pin connector
=>
CAMERA IN
BVW-50/50P Portable VTR
Camera cable
Select a camera cable to fit the camera input
connector on the VIR you are using.
¢ The maximum camera cable extent is 10 m (33 ft).
For details, consult your sales representative or supplier.
Video monitor
¢ If using an S-VHS VTR, using a video monitor with
an S-video input connector and connecting it to the
S-video connector of the VTR will allow you to
monitor a clear picture, with no flecking.
© The output video signal from the VIDEO OUT
connector of this unit is a composite video signal.
Connect the VIDEO OUT connector of this unit to a
composite video signal input connector of the
monitor.
25
LL
Connections
VTR selector settings on the CA-327/327P
Setting the VTR selector switch on the
camera adaptor
When using the camera with a CA-537/537P/327/327P
Camera Adaptor, it is essential to correctly set the
VTR selector switch on the camera adaptor according
to the VIR connected. This switch determines the
type of video signal output from the VTR/CCU/CMA
connector and the audio output signal level.
pa
oF
Sony broadcast and
Composite
professiona' VTRs:
BVU-150/150P and
VO-6800/6800PS"
Sony professional
VTRs: VO-8800/
8800P and EVV-
9000/9000P
Panasonic AG-6400
VHS VTR
Panasonic AG-7400
S-VHS VTR®
a) Set the audio input level on the VO-6800/6800PS to -60
dB.
b) Set the input selector switch on the AG-7400 to Y/C.
Example: When using a CA-537/537P
Composite
H
j VTR SELECT switch
i
2
i
im 73
|
—
VTR selector settings on the CA-537/537P.
Sony broadcast and
Composite
professional VTRs:
{BVU-150/
BVU-150/150P,
150P and
VO-6800/
VO-6800/
6800PS", BVW-
6800PS) or
50/50P and BVV-
component
5/5PS"
(BVW-50/
SOP and
BVV-5/5PS)
Sony professional
YIC
VTRs:
VO-8800/8800P
and EVV-9000/
9000P
Panasonic AG-6400
Composite
VHS VTR
Panasonic AG-7400
YIC
S-VHS VTR® and
JVC BR-S405 S-
VHS VTR
a) Set the audio input level on the VO-6800/6800PS to -60
dB.
b) When the BVV-5/5PS is used as a portable VTR, a VA-5/
5P VTR Composite/Component Adaptor is required.
Cc) Set the input selector switch on the AG-7400 to Y/C.
26
Advertisement
Table of Contents
