Skil PWRCORE 20 PR0600B-00 Owner's Manual page 16

Installing And Removing Storage
Clip (Fig . 9)
Your machine includes a removable storage
clip that can be used to hang the saw on a nail,
screw, or similar sturdy object.
WARNING
and bar with chain sheath before hanging the
saw.
To install:
a. Remove the battery pack from the machine.
b. Align the rib of the storage clip with the
threaded hole on the base of the machine.
c. Insert the screw provided and securely
tighten the screw with a T20 Torx key (not included).
To remove:
a. Remove the battery pack from the machine.
b. Use a T20 Torx key (not included) to loosen the screw that attaches the storage clip to the
pruning saw.
c. Remove the screw and the storage clip. Store them in a safe place for future use.
Filling Oil Tank with Bar and
Chain Lubricant (Fig . 10)
The pruning saw is not filled with oil at the time
of purchase. It is essential to fill the tank with
oil before use. Operating the saw without chain
oil or when the oil level is below about 1/5 the
capacity of the oil tank will result in damage to
the saw. Chain life and cutting capacity depend
on optimum lubrication.
The chain is automatically lubricated with chain
oil during operation.
WARNING
the pruning saw. Oil may spill and cause a fire.
a. Remove the battery pack from the pruning saw.
b. Clean the oil-tank cap and the area around it to ensure that no dirt falls into the oil tank.
c. Position the pruning saw on its side on a firm, flat surface, so that the oil-tank cap is facing
up. Lift the cap tab and rotate it counterclockwise to remove the cap.
d. Carefully pour the bar and chain oil into the tank. Fill to the bottom of the fill neck. Wipe off
any excess oil.
e. Replace and tightly secure the cap. Fold the cap tab.
f. Place the saw upright and examine the oil level through the translucent plastic oil tank.
NOTICE
We recommend using environmentally-friendly biodegradable chain oil specifically intended
•
to be used with chain saws. Never use oil or other lubricants not specifically designed for
use on the bar and chain. This can lead to a clogged oil system, which may cause premature
wear of the bar and chain.
16
To prevent the risk of injury,
always cover the saw chain
Do not smoke or bring any
fire or flame near the oil or
Fig. 9
Fig. 10
Oil-tank Cap
Cap Tab
Oil Tank