BabyGo SKANDI Instruction Manual page 15

Coverting high chair to low chair
COVERTING HIGH CHAIR TO LOW CHAIR
Remove the four legs and attach the lower leg to the bottom of the chair like the
following pictures:
Remove the four legs and attach the lower leg to the bottom of the chair
like the following pictures:
Harness:
HARNESS
WARNING: Use the safety harness at all times
WARNING: Use the safety harness at all times
1.
To buckle the seat belt, just buckle the waist buckle (belt buckle with shoulder
�. To buckle the seat belt, just buckle the waist buckle (belt buckle with shoulder
strap) into the separator until you hear a „ticking" sound. To unbuckle the seat
strap) into the separator until you hear a "ticking" sound. To unbuckle the seat
belt, press the middle button and the belt buckles on both sides will pop out
belt, press the middle button and the belt buckles on both sides will pop out
automatically.
automatically.
2.
�. The shoulder strap of the seat belt comes with two height options. To adjust the
The shoulder strap of the seat belt comes with two height options. To adjust the
height, remove the shoulder strap from chair back, and pull it out of the chair back height, remove the shoulder strap from chair back, and pull it out of the chair back
and seat cushion. For installation, insert the shoulder strap into the slots on the
and seat cushion. For installation, insert the shoulder strap into the slots on the
seat cushion and chair back respectively. (Note: Baby must use seat belts when
seat cushion and chair back respectively. (Note: Baby must use seat belts when
using the high chair.)
using the high chair.)
14