HIKVISION UD34183B Quick Start Manual

Network Horn Speaker
Quick Start Guide
UD34183B
©2023 Hangzhou Hikvision Digital Technology Co., Ltd. All rights reserved.
About this Manual
The Manual includes instructions for using and managing the Product. Pictures,
charts, images and all other information hereinafter are for description and
explanation only. The information contained in the Manual is subject to change,
without notice, due to firmware updates or other reasons. Please find the latest
version of this Manual at the Hikvision website (https://www.hikvision.com/).
Please use this Manual with the guidance and assistance of professionals trained
in supporting the Product.
Trademarks
and other Hikvision's trademarks and logos are the properties of
Hikvision invarious jurisdictions.
Other trademarks and logos mentioned are the properties of their respective
owners.
Disclaimer
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS MANUAL AND
THE PRODUCT DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE,
ARE PROVIDED "AS IS" AND "WITH ALL FAULTS AND ERRORS". HIKVISION MAKES
NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION,
MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS FOR A PARTICULAR
PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT
WILL HIKVISION BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL,
INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES
FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA,
CORRUPTION OF SYSTEMS, OR LOSS OF DOCUMENTATION, WHETHER BASED ON
BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY,
OR OTHERWISE, IN CONNECTION WITH THE USE OF THE PRODUCT, EVEN IF
HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSS.
YOU ACKNOWLEDGE THAT THE NATURE OF THE INTERNET PROVIDES FOR
INHERENT SECURITY RISKS, AND HIKVISION SHALL NOT TAKE ANY
RESPONSIBILITIES FOR ABNORMAL OPERATION, PRIVACY LEAKAGE OR OTHER
DAMAGES RESULTING FROM CYBER-ATTACK, HACKER ATTACK, VIRUS INFECTION,
OR OTHER INTERNET SECURITY RISKS; HOWEVER, HIKVISION WILL PROVIDE
TIMELY TECHNICAL SUPPORT IF REQUIRED.
YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL APPLICABLE LAWS,
AND YOU ARE SOLELY RESPONSIBLE FOR ENSURING THAT YOUR USE CONFORMS
TO THE APPLICABLE LAW. ESPECIALLY, YOU ARE RESPONSIBLE, FOR USING THIS
PRODUCT IN A MANNER THAT DOES NOT INFRINGE ON THE RIGHTS OF THIRD
PARTIES, INCLUDING WITHOUT LIMITATION, RIGHTS OF PUBLICITY, INTELLECTUAL
PROPERTY RIGHTS, OR DATA PROTECTION AND OTHER PRIVACY RIGHTS. YOU
SHALL NOT USE THIS PRODUCT FOR ANY PROHIBITED END-USES, INCLUDING THE
DEVELOPMENT OR PRODUCTION OF WEAPONS OF MASS DESTRUCTION, THE
DEVELOPMENT OR PRODUCTION OF CHEMICAL OR BIOLOGICAL WEAPONS, ANY
ACTIVITIES IN THE CONTEXT RELATED TO ANY NUCLEAR EXPLOSIVE OR UNSAFE
NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF HUMAN RIGHTS ABUSES. IN THE EVENT
OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE
LATTER PREVAILS.
1
Appearance
25(0.98")
10.5(0.41")
2
Interface
1 Unscrew the back cover of the
device.
Insert the network interface into the
2
threading cap.
Network Interface
The network port of the type I device
is located in the back cover. You can
Threading Cap
see it by unscrewing the back cover.
175(6.89")
Unit: mm(inch)
Ø133(5.24")
Remove the waterproof structural
3
component from the rubber plug.
Waterproof Structural
Component
Thread the threading cap into
4
Back Cover
the rubber plug on the back
cover of the device and adjust
the rubber plug to the
appropriate position.
Rubber Plug
To ensure waterproof effect,
the protruding structure of the
rubber plug covering the
network cable should face the
outside of the equipment.
12 V auxiliary power output is used to supply power to
5
Remove the threading cap and
accessories.
insert the network interface
Only certain models support power input and support 24 VDC
into the device's network port.
power supply. Please refer to the actual device.
Tighten the device back cover.
6
Warning
• Refer to the device label for the standard power supply. Please make sure your
power supply matches with your device.
• In the use of the product, you must be in strict compliance with the electrical
safety regulations of the nation and region.
• CAUTION: If the fuse of the device can be replaced, replace it only with the
same model to reduce the risk of fire or electric shock.
• CAUTION: If the device needs to be installed with a specific bracket of our
company, use the corresponding bracket only. Use others (such as carts, stands,
and carriers) may result in instability and cause injury. Refer to the device
datasheet for bracket model details. Refer to datasheet for details.
• For the device with sound playing function, to prevent possible hearing
damage, do not listen at high volume levels for long periods. Refer to the user
manual for details.
• Refer to the device label for the standard power supply. Please make sure your
power supply matches with your device.
• Make sure that the power has been disconnected before you wire, install, or
disassemble the device.
• To avoid heat accumulation, good ventilation is required for a proper operating
environment.
• If smoke, odor, or noise arises from the device, immediately turn off the power,
unplug the power cable, and contact the service center.
• If the product does not work properly, please contact your dealer or the
nearest service center. Never attempt to disassemble the product yourself. We
shall not assume any responsibility for problems caused by unauthorized repair or
maintenance.
Caution
• For the battery with + and - signs, + identifies the positive terminals of the
device which is used with or generates direct current, and - identifies the negative
terminals of the device which is used with or generates direct current.
• No naked flame sources, such as lighted candles, should be placed on the
equipment.
• If the serial port of the device is used for debugging only, it is reserved only for
professionals or technical support for device maintenance. Refer to the document
for details.
• Attach the device properly to the floor/wall in accordance with the installation
instructions to prevent injury. Refer to the document for details.
• DO NOT drop the product or subject it to physical shock. Do not install the
product on vibratory surface or places.
• DO NOT expose the device to high electromagnetic radiation.
• DO NOT expose the device to extremely hot, cold, dusty, corrosive, saline-
Note
alkali, or damp environments. For temperature and humidity requirements, refer
to the datasheet for details.
The appearance varies with the models.
• DO NOT install indoor product where it may get wet by water or other liquid.
The actual device prevails.
• To avoid fire hazard or electric shock, DO NOT expose the device to rain or
extremely damp environments.
• Accessing to the Internet may cause network security problems. Please
strengthen the protection of your personal information and data security. When
you find that the device may have network security risks, please contact us in
time.
• Proper configuration of all passwords and other security settings is the
responsibility of the installer and/or end-user.
• Keep all wrappers after unpacking them for future use. In case of any failure
occurred, you need to return the device to the factory with the original wrapper.
Transportation without the original wrapper may result in damage on the device
and the company shall not take any responsibilities.
Note
• This installation should be made by a qualified service person and should
conform to all the local codes.
Network
Interface
Audio Input
*Power Input