HIKVISION DS-QAZ1430G1 Quick Start Manual

Network Column Speaker
Quick Start Guide
UD33499B-A
About this Document
This Document includes instructions for using and managing the Product. Pictures, charts, images
and all other information hereinafter are for description and explanation only.
The information contained in the Document is subject to change, without notice, due to firmware
updates or other reasons. Please find the latest version of the Document at the Hikvision website
(https://www.hikvision.com). Unless otherwise agreed, Hangzhou Hikvision Digital Technology Co.,
Ltd. or its affiliates (hereinafter referred to as "Hikvision") makes no warranties, express or implied.
Please use the Document with the guidance and assistance of professionals trained in supporting
the Product.
About this Product
This product can only enjoy the after-sales service support in the country or region where the
purchase is made.
Acknowledgment of Intellectual Property Rights
Hikvision owns the copyrights and/or patents related to the technology embodied in the Products
described in this Document, which may include licenses obtained from third parties.
Any part of the Document, including text, pictures, graphics, etc., belongs to Hikvision. No part of this
Document may be excerpted, copied, translated, or modified in whole or in part by any means
without written permission.
and other Hikvision's trademarks and logos are the properties of Hikvision in various
jurisdictions.
Other trademarks and logos mentioned are the properties of their respective owners.
LEGAL DISCLAIMER
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS DOCUMENT AND THE PRODUCT
DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, ARE PROVIDED "AS IS" AND "WITH
ALL FAULTS AND ERRORS". HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING
WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS FOR A PARTICULAR
PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT WILL HIKVISION
BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES,
INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION,
OR LOSS OF DATA, CORRUPTION OF SYSTEMS, OR LOSS OF DOCUMENTATION, WHETHER BASED ON
BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY, OR OTHERWISE, IN
CONNECTION WITH THE USE OF THE PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES OR LOSS.
YOU ACKNOWLEDGE THAT THE NATURE OF THE INTERNET PROVIDES FOR INHERENT SECURITY RISKS,
AND HIKVISION SHALL NOT TAKE ANY RESPONSIBILITIES FOR ABNORMAL OPERATION, PRIVACY
LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER-ATTACK, HACKER ATTACK, VIRUS INFECTION,
OR OTHER INTERNET SECURITY RISKS; HOWEVER, HIKVISION WILL PROVIDE TIMELY TECHNICAL
SUPPORT IF REQUIRED.
YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL APPLICABLE LAWS, AND YOU ARE
SOLELY RESPONSIBLE FOR ENSURING THAT YOUR USE CONFORMS TO THE APPLICABLE LAW.
ESPECIALLY, YOU ARE RESPONSIBLE, FOR USING THIS PRODUCT IN A MANNER THAT DOES NOT
INFRINGE ON THE RIGHTS OF THIRD PARTIES, INCLUDING WITHOUT LIMITATION, RIGHTS OF
PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, OR DATA PROTECTION AND OTHER PRIVACY RIGHTS.
YOU SHALL NOT USE THIS PRODUCT FOR ANY PROHIBITED END-USES, INCLUDING THE
DEVELOPMENT OR PRODUCTION OF WEAPONS OF MASS DESTRUCTION, THE DEVELOPMENT OR
PRODUCTION OF CHEMICAL OR BIOLOGICAL WEAPONS, ANY ACTIVITIES IN THE CONTEXT RELATED
TO ANY NUCLEAR EXPLOSIVE OR UNSAFE NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF HUMAN RIGHTS
ABUSES.
IN THE EVENT OF ANY CONFLICTS BETWEEN THIS DOCUMENT AND THE APPLICABLE LAW, THE
LATTER PREVAILS.
© Hangzhou Hikvision Digital Technology Co., Ltd. All rights reserved.
1
Appearance
Appearance and Dimensions
160 mm(6.30")
160 mm(6.30")
2
Interface
Rear Panel
Indicator
Weep Hole Weep Hole
Microphone
Microphone
Weep Hole Weep Hole
Reset Button
Signal Line
Note
The appearance varies with the models. The actual device prevails.
The corresponding wiring method：
IN1
Alarm Input Device
IN2
Alarm In
GND
IN
Line In
GND
Note
The supported power supply is 24 VDC。
Warning
• Refer to the device label for the standard power supply. Please make sure your
power supply matches with your device.
• In the use of the product, you must be in strict compliance with the electrical
safety regulations of the nation and region.
• CAUTION: If the fuse of the device can be replaced, replace it only with the
same model to reduce the risk of fire or electric shock.
• CAUTION: If the device needs to be installed with a specific bracket of our
company, use the corresponding bracket only. Use others (such as carts, stands,
and carriers) may result in instability and cause injury. Refer to the device
datasheet for bracket model details. Refer to datasheet for details.
• For the device with sound playing function, to prevent possible hearing
damage, do not listen at high volume levels for long periods. Refer to the user
manual for details.
• Refer to the device label for the standard power supply. Please make sure your
power supply matches with your device.
• Make sure that the power has been disconnected before you wire, install, or
disassemble the device.
• To avoid heat accumulation, good ventilation is required for a proper operating
environment.
• If smoke, odor, or noise arises from the device, immediately turn off the power,
unplug the power cable, and contact the service center.
• If the product does not work properly, please contact your dealer or the
nearest service center. Never attempt to disassemble the product yourself. We
shall not assume any responsibility for problems caused by unauthorized repair or
maintenance.
• Device powered by Safety Extra-Low Voltage (SELV): The power source should
meet limited power source or PS2 requirements according to IEC 60950-1 or IEC
62368-1 standard.
Caution
• For the battery with + and - signs, + identifies the positive terminals of the
device which is used with or generates direct current, and - identifies the negative
terminals of the device which is used with or generates direct current.
• No naked flame sources, such as lighted candles, should be placed on the
equipment.
• If the serial port of the device is used for debugging only, it is reserved only for
professionals or technical support for device maintenance. Refer to the document
for details.
• Attach the device properly to the floor/wall in accordance with the installation
instructions to prevent injury. Refer to the document for details.
• DO NOT drop the product or subject it to physical shock. Do not install the
product on vibratory surface or places.
• DO NOT expose the device to high electromagnetic radiation.
• DO NOT expose the device to extremely hot, cold, dusty, corrosive, saline-
alkali, or damp environments. For temperature and humidity requirements, refer
to the datasheet for details.
• DO NOT install indoor product where it may get wet by water or other liquid.
• To avoid fire hazard or electric shock, DO NOT expose the device to rain or
extremely damp environments.
• Accessing to the Internet may cause network security problems. Please
strengthen the protection of your personal information and data security. When
you find that the device may have network security risks, please contact us in
time.
• Proper configuration of all passwords and other security settings is the
responsibility of the installer and/or end-user.
• Keep all wrappers after unpacking them for future use. In case of any failure
occurred, you need to return the device to the factory with the original wrapper.
Transportation without the original wrapper may result in damage on the device
and the company shall not take any responsibilities.
• If the power output port of the device does not comply with Limited Power
Source, the connected device powered by this port shall be equipped with a fire
enclosure.
• Do not ingest battery. Chemical Burn Hazard!
• This product contains a coin/button cell battery. If the coin/button cell battery
is swallowed, it can cause severe internal burns in just 2 hours and can lead to
death.
• Keep new and used batteries away from children.
• If the battery compartment does not close securely, stop using the product and
keep it away from children.
• If you think batteries might have been swallowed or placed inside any part of
the body, seek immediate medical attention.
• CAUTION: Risk of explosion if the battery is replaced by an incorrect type.
• Improper replacement of the battery with an incorrect type may defeat a
safeguard (for example, in the case of some lithium battery types).
• Do not dispose of the battery into fire or a hot oven, or mechanically crush or
cut the battery, which may result in an explosion.
• Do not leave the battery in an extremely high temperature surrounding
environment, which may result in an explosion or the leakage of flammable liquid
or gas.
• Do not subject the battery to extremely low air pressure, which may result in
an explosion or the leakage of flammable liquid or gas.
• Dispose of used batteries according to the instructions
Note
• This installation should be made by a qualified service person and should
conform to all the local codes.