Dimplex TRP 150 X Installation And Operating Instructions Manual page 21

TRP 150 X
6.14.3. Assigning programs
Press the
ously for 3 s to open the programming
menu.
Using the + and – keys, select ON and
confirm with the
OFF ends the menu.
Pr is displayed. Press the
Use the + and – keys to assign each
weekday a program (P1 to P6), and in
each case confirm with the
See above for display of weekdays.
Use the + or – keys to select EXIT and confirm with the
key to end programming mode.
6.14.4. Preconfigured programs
Program Settings
P1 Comfort temperature from 5 am to 9 am and
from 5 pm to 11 pm Monday to Friday.
P2 Comfort temperature from 5 am to 9 am,
from 12 pm to 2 pm and from 5 pm to 11 pm
Monday to Friday.
P3 Comfort temperature from 5 am to 11 pm at
the weekend.
6.14.5. User-defined programs
Press the
ously for 3 s to open the programming
menu.
Using the + and – keys, select ON and
confirm with the
OFF ends the menu.
Pr is displayed.
Use the + or – keys to select P4, P5 or P6 and con-

firm with the key.
(start time) for slot 1 is displayed. Confirm with

the key.
Use the + or – keys to select the start time for slot

1 and confirm with the
www.dimplex.eu
and keys simultane-
key.
key.
key.
and keys simultane-
key.
key.
2302/A
(end time) for slot 1 is displayed.

Press the key.
Use the + or – keys to select the end time for slot 1

and confirm with the
Repeat these steps for slots 2 and 3.

Use the + or – keys to select EXIT and confirm with

the key to end programming mode.
6.15. Illuminated mirror
The USB cable and the USB power supply are in-
cluded in the scope of supply.
The illuminated mirror is supplied separately from the
device. To attach it, fit the rear of the mirror to the
base on the device.
The alignment can be adjusted as required.
1 Touch switch
Press the touch switch to switch the ring light on and
off. Hold down the touch switch to adjust the bright-
ness.
6.16. Resetting to factory settings
Press the key for 10 s to reset the device to the
factory settings.
Comfort set temperature
ECO set temperature
Window monitoring
Key lock (simple or with code)
Display illumination
Entry tone
Temperature display
Temperature limit
Programming
"Smart Boost" function
English
key.
1
19 °C
15.5 °C
Enabled
None
10 s
Enabled
°C
Disabled
None
None
EN-9