4) SRV programming
JOB#904-A, B : Number of departments.
3-5. Note
The connector needs to be connected in a manner shown in the
figure, when using the ER-1191S main PWB in ER-1911.
ER-1911S, ER-2386S Main PWB
sensor connector
Drawer connector
Fig. 3-11
The 2-pin connector must be inserted in the 2-pin on the left side
of the drawer connector (CN7).
4.SERVICE PRECAUTION
When removing the top cabinet, lift it up in the first place as illustrated,
then remove the transformer cable and remove the top cabinet.
ER-1911S