Table of Contents
Advertisement
mm
?i ***** f
«T7^ •!
RETURN
The password screen is shown when you se(ect levels 0 to 7.
1-
Input a 4-digit password with the numbered buttons and Dress
[ENTER]
M
•If you enter a wrong number, press (CANCEL) to erase it before you
press [ENTER].
•The lock symbol appears closed to show the rating is locked.
• Do not forget your password.
2.
Press [ENTER] to confirm the 4 digits.
/
------
Now, when you insert a DVD-Video that exceeds the ratings limit
you set, a message appears on the television.
Follow the on-screen instructions.
CANCEL
' Numbered
buttons
Common procedures
Remote control only
See page 16 for menu and option details.
1 Press [SETUP] to show the menus.
SETUP f Disc
r~
•The QUICK SETUP screen appears when you press [SETUP] the first
time after purchase (-► page 6).
2
Press [◄, ►] to select the menu's tab.
The screen changes to display the menu.
3
Press [A, T] to select the item you want to
change and press [ENTER].
4
Press [A ,▼,◄,►] to select the option and press
[ENTER].
The screen now shows the menu again.
To return to the previous screen
Press [RETURN],
When you are finished
Press [SETUP].
Digital output
Change the settings when you have connected equipment through this
unit s DIGITAL AUDIO OUT terminal (OPTICAL).
PCM Down Conversion
Select how to output audio with a sampling frequency of 96 kHz.
Select ''Yes" if the equipment you connect cannot process signals with a
sampling frequency of 96 kHz.
• Select No if you use analogue connection, irrespective of the type of
equipment.
No
(Factor/ preset):
Output as 96 kHz. There is no output if the disc has copy protection. Select
"Yes" in this case.
Yes:
Converted to 48 kHz for output.
Dolby Digital, DTS Digital Surround and MPEG*
Bitstream:
(Factory preset for Dolby Digital)
Select if the equipment you connected can decode the signaf.
PCM:
(Factory preset for MPEG*)
Select if the equipment you connected cannot decode the signal.
Off:
(Factory preset for DTS Digital Surround)
Select if the equipment you connected cannot decode the signal.
'''MPEG is not available in Asia.
IMPORTANT
If the equipment you connected cannot decode the signal, the
setting must be changed to PCM or Off. If not, signals the equipment
cannot process will be output by this unit, causing high levels of
noise which can damage your hearing and the speakers.
This product incorporates copyright protection technology that is
protected by method claims of certain U.S. patents and other intel¬
lectual property rights owned by Macrovision Corporation and oth¬
er rights owners. Use of this copyright protection technology must
be authorized by Macrovision Corporation, and is intended for
home and other limited viewing uses only unless otherwise autho¬
rized by Macrovision Corporation. Reverse engineering or disas¬
sembly is prohibited.
Manufactured under license from Dolby Laboratories.
Dolby ,
Pro Logic" and the double-D symbol are trademarks of
Dolby Laboratories.
"DTS", "DTS Digital Surround1' and "DTS Digital Out" are registered
trademarks of Digital Theater Systems, Jnc.
Advertisement
Table of Contents
