Set Up And Switch On Your Phone - Nokia 150 Manual

Nokia 150 Panduan Pengguna
Avoid touching the antenna area while the antenna is in use. Contact with antennas affects the
communication quality and may reduce battery life due to higher power level during operation.
Do not connect to products that create an output signal, as this may damage the device. Do
not connect any voltage source to the audio connector. If you connect an external device
or headset, other than those approved for use with this device, to the audio connector, pay
special attention to volume levels. Parts of the device are magnetic. Metallic materials may be
attracted to the device. Do not place credit cards or other magnetic storage media near the
device, because info stored on them may be erased.
Some of the accessories mentioned in this user guide, such as charger, headset, or data cable,
may be sold separately.
Note: The pre-set security code is 12345. To switch on the security code, select Menu >
Settings > Security settings > Phone security , enter the code 12345 and select OK , and
then select On . To change the security code, select Menu > Settings > Security settings
> Change access codes > Change security code , enter the current security code and select
OK . Enter your new code and select OK , then enter the new code again and select OK .
When you change the code, you need to remember the new code, as HMD Global is not able to
open or bypass it.

SET UP AND SWITCH ON YOUR PHONE

SIM mini
Penting: Peranti ini direka bentuk untuk digunakan dengan kad SIM mini (lihat rajah) sahaja.
Penggunaan kad SIM yang tidak serasi boleh merosakkan kad atau peranti dan boleh
merosakkan data yang disimpan pada kad.
Nota: Matikan peranti dan tanggalkan pengecas dan sebarang peranti lain sebelum membuka
sebarang penutup. Elakkan menyentuh komponen elektronik semasa menukar sebarang
penutup. Sentiasa simpan dan gunakan peranti dengan sebarang penutup dipasang.
© 2023 HMD Global Oy. Hak cipta terpelihara. 6