Set Up And Switch On Your Phone - Nokia 150 2023 Manual

Hide thumbs Also See for 150 2023:

Table of Contents

Nokia 150 (2023) 사용자 가이드

Note: The pre-set security code is 12345. To switch on the security code, select Menu >

Settings > Security settings > Phone security , enter the code 12345 and select OK , and

then select On . To change the security code, select Menu > Settings > Security settings

> Change access codes > Change security code , enter the current security code and select

OK . Enter your new code (5-8 digits) and select OK , then enter the new code again and

select OK . When you change the code, you need to remember the new code, as HMD Global

is not able to open or bypass it.

Parts and connectors, magnetism

Do not connect to products that create an output signal, as this may damage the device. Do

not connect any voltage source to the audio connector. If you connect an external device

or headset, other than those approved for use with this device, to the audio connector, pay

special attention to volume levels.

Parts of the device are magnetic. Metallic materials may be attracted to the device. Do not

place credit cards or other magnetic stripe cards near the device for extended periods of time,

since the cards may be damaged.

SET UP AND SWITCH ON YOUR PHONE

Mini SIM

Important: This device is designed to be used with a mini SIM card only. Use of incompatible

SIM cards may damage the card or the device, and may corrupt data stored on the card.

참 고 : 커 버 를 분 리 할 때 에 는 먼 저 기 기 전 원 을 끄 고 충 전 기 및 기 타 기 기 를 분 리 하 십 시 오 . 커 버 를 갈

아 끼우는 동안에는 전자 부품을 건드리지 마십시오 . 항상 모든 커버를 부착한 상태로 기기를 저장하

고 사용하십시오 .

Table of Contents

Ta-1582