Table of Contents
Advertisement
08 Using a Multi Code Remocon
A Multi Code Remocon is a special remote which is designed to control multiple TVs. This function is useful
where there is more than one TV in a location.
You can control up to 10 TVs with a different ID code of each remote with no conflicts between the TVs. ID
numbers are displayed on each TV's OSD.
The Initial ID code for each TV is 0.
• You can set and reset the ID code in analog TV mode or PC mode. (Not available in DTV mode.)
• You can set the ID code to any digit from 0 to 9.
• To set a TV's ID code, follow these steps:
1. Aim the remote at the TV, and then press the MUTE button and the RETURN button simultaneously for more than
7 seconds. When you stop pressing the buttons, the TV displays the current ID in the middle of the screen and a
message appears.
2. Press the number on the remote you want to assign to the TV. The TV displays a message.
3. After you see the message, if you press 1, the TV and Remote will be set to ID code 1.
– The TV can then only be controlled by a remote which has the same ID code 1.
– To reset the ID code, press the MUTE button and the EXIT button simultaneously for more than 7 seconds. When you
stop pressing the buttons, the ID codes of the TV and Remote are reset to 0.
English - 45
Advertisement
Table of Contents
