Connections; Connecting To Your Internet Network - Samsung HG32NJ690F Install Manual

06 Connections

Connecting to your Internet network

You can set up your TV so that it can access the SMART TV applications through your local area network (LAN) using a
wired or wireless connection.
• After you have physically connected your TV to your network, you must configure the network connection to
complete the process. You can configure the connection after the Initial Setup process, through the TV's menu
(Hotel Option > Network > Netwotk Setup).
Establishing a wireless Internet connection
Connect the TV to the Internet using a standard wireless router or modem.
The LAN Port on the Wall
LAN Cable (Not Supplied)
• This Smart TV supports the IEEE 802.11a/b/g /n communication protocols. Samsung recommends using IEEE
802.11n. Otherwise, when you play video over a network connection, the video may not play smoothly.
• To use a wireless network, the TV must be connected to a wireless router or modem. If the wireless router supports
DHCP, the TV can use a DHCP or static IP address to connect to the wireless network.
• Select a channel that is not currently in use for the wireless router. If the channel set for the wireless router is
currently being used by another device, the result is usually interference and/or a communications failure.
• Most wireless networks have an optional security system. To enable a wireless network's security system, you need
to create a security key using characters and numbers, and then enter that key into the router through its menu.
You then must enter this security key into any other devices you want to connect to the wireless network.
Wireless IP Router or Modem
that has a DHCP Server
English - 19