Advertisement
Quick Links
If you are a Windows user, please find the appropriate keycaps in the box, then follow the instructions below to find and replace the following keycaps.
1
Connect 2.4GHz Receiver
Connect the 2.4GHz receiver to
the device USB port.
Switch toggle to 2.4GHz mode
G / Cable / BT
G = 2.4GHz
Type-C
Extension Adapter
Cable
For Receiver
2.4GHz
Receiver
/
Note: For the best wireless experience, we recommend using the
extension adapter for receiver and putting the 2.4GHz receiver
somewhere on your desk close to your keyboard for a low rate
of latency and fewer signal interferences.
Quick Start Guide
/
2
Connect Bluetooth
/
G / Cable / BT
Press fn + 1 (for 4 seconds) and pair with
device named Keychron K1 Max.
/
fn + 1
Advertisement
Related Manuals for Keychron K1
Summary of Contents for Keychron K1
- Page 1 Cable For Receiver Press fn + 1 (for 4 seconds) and pair with 2.4GHz device named Keychron K1 Max. Receiver fn + 1 Note: For the best wireless experience, we recommend using the extension adapter for receiver and putting the 2.4GHz receiver somewhere on your desk close to your keyboard for a low rate of latency and fewer signal interferences.
- Page 2 5. Flash the firmware with the QMK Toolbox. 6. Factory reset the keyboard by pressing fn + J + Z (for 4 seconds). Not Happy *Step by step guide can be found on our website. support@keychron.com...
Need help?
Do you have a question about the K1 and is the answer not in the manual?
Questions and answers