Advertisement
UPX & DIGITAL VIDEO PROCESSORS
Scalers: (3) Scalable video windows with time base correction,
gamma correction, line doubling, motion adaptive deinterlacing, and
reverse 3:2/2:2 pulldown; (1) additional scaler enables display of
Output B within a window on Output A
Streaming/File Formats: MPEG4 & MJPEG via Axis Media
Control plus all formats supported by the embedded media player
applications
1
Audio
Streaming/File Formats: As supported by the embedded media
player applications
Audio Feedback (WAV): 8 & 16 bit PCM, mono & stereo, 8 – 44
kHz sampling rates
Connectors
VIDEO INPUT 1/HDTV: (3) BNC female
Signal Types: Dynamically configurable under system control as:
(1) Component (YP
(3) Composite (NTSC/PAL) video inputs, or
(1) S-Video (Y/C) input and (1) Composite input
Formats: SDTV 480i (NTSC) & 576i (PAL), EDTV 480p & 576p, HDTV
720p & 1080i;
Input Levels: 0.5 to 1.5 V
P-P
Input Impedance: 75 ohms
Horizontal Frequency: 15 to 45 kHz
Vertical Frequency: 50 to 60 Hz
VIDEO INPUT 2: (3) BNC female
Signal Types: Dynamically configurable under system control as:
(1) Component (YP
(3) Composite (NTSC/PAL) video inputs, or
(1) S-Video (Y/C) input and (1) Composite input
Formats: SDTV 480i (NTSC) & 576i (PAL)
Input Levels: 0.5 to 1.5 V
P-P
Input Impedance: 75 ohms
Horizontal Frequency: 15.75 kHz (NTSC); 15.625 kHz (PAL)
Vertical Frequency: 50 to 60 Hz
RGB INPUT A – B: (2) DB15HD female, RGB (VGA) inputs
Analog Formats: RGBHV, RGBS and RG
Input Resolution, Non-interlaced: 640 x 480 minimum to 1600 x 1200
maximum;
Input Levels: 0.5 to 1.5 V
P-P
Input Impedance: 75 ohms
Sync Input Type: Autodetect RGBHV, RGBS, RG
Sync Input Level: 3 to 5 V
Sync Input Impedance: 1k ohms
Horizontal Frequency: 31.5 to 100 kHz
Vertical Frequency: 60 to 85 Hz (75 Hz limit at 1600 x 1200)
RGB OUTPUT A – B: (2) DB15HD female, RGB (VGA) outputs
(Both outputs use same display setting);
Analog Format: RGBHV
Aspect Ratio: Software configurable 4:3, 15:9, or 16:9
Output Resolution: Software selectable 800x600, 1024x768,
1280x720, 1280x768, 1280x960, 1280x1024;
Sync Output Type: RGBHV
Sync Output Level: TTL, 5.0 V
Polarity: H/V user-selectable
Vertical Frequency: 60 to 85 Hz (60 Hz limit at 1280 x 1024)
www.crestron.com
|
800.237.2041
© 2007 Specifications subject to change without notice
UPX Universal Presentation System
P
) video input, or
B
R
with built-in DC restoration
P
) video input, or
B
R
with built-in DC restoration
B
s
with built-in DC restoration
B
s
P-P
P-P
|
201.767.3400
Universal Presentation Processor
MIC: (1) 3.5 mm TRS mini phone jack (red)
Simplex-powered PC microphone input
Input Level: 0.1 V
(Boost on); 1.0 V
RMS
Input Impedance: 10k ohms
LINE IN: (1) 3.5 mm TRS mini phone jack (blue)
Unbalanced stereo audio input
Input Level: 1.0 V
RMS
Input Impedance: 10k ohms
LINE OUT: (1) 3.5 mm TRS mini phone jack (green)
Unbalanced stereo audio output
Output Level: 1.0 V
RMS
Output Impedance: 10k ohms
SPDIF: (1) RCA female, coaxial digital audio output
Impedance: 75 ohms
1394: (1) IEEE 1394b port
1
NETWORK: (1) 8-wire RJ45 with 2 LED indicator
10/100BaseT Ethernet port
Green LED indicates link status
Yellow LED indicates Ethernet activity
USB: (4) Type A female (1 front, 3 rear)
USB 2.0 ports for DTT, touch/mouse, keyboard, and storage
devices
1
MOUSE/KEYBOARD: (2) 6-pin mini DIN female
PS/2
®
mouse and keyboard input ports
NET: (1) 4-pin 5mm detachable terminal block
Cresnet slave port (data only; 24V terminal not used)
Connects to Cresnet control network
COM: (1) DB9 male, bidirectional RS-232/422/485 port for 3rd-party
device control or Touch-The-PC mouse control;
Up to 115.2K baud; hardware and software handshaking support
AUX COM: (1) DB9 male, bidirectional RS-232 port for computer
console and touch/mouse input
1
;
Up to 115.2k baud; hardware and software handshaking support
PC CARD A – B: (2) Type II PC Card slots (front)
For memory expansion, project upload, and wireless NIC
COMPACT FLASH: (1) Type II Compact Flash card slot
For 1GB compact flash card containing firmware and OS (included)
100-240V ~ 6.3A: (1) IEC socket and main power switch
Mates with removable power cord, included
G: (1) 6-32 screw, chassis ground lug
Controls
PWR: (1) Recessed pushbutton, processor shutdown/reactivate
RESET: (1) Recessed pushbutton, hardware/software reset
SETUP: (1) Pushbutton on rear panel, touch-settable ID (TSID)
LED Indicators
PWR: (green) Indicates processor is powered on and active
NET: (yellow) Indicates communication with Cresnet system
SETUP: (red) On rear panel, touch-settable ID (TSID)
UPX-2
(Boost off)
RMS
1
> continued
193
Advertisement
