E Advanced Features; 1-Programming Modo Cicassisnsssssssesenstacvnsccousiei Secs Sesavinanvacdsbeesactipeises - Kawai MR380 Owner's Manual

A. Entering the programming mode
(1) Press the CHORUS switch.
(2) Holding down the CHORUS switch, press the first three tone
selector switches (PIANO1, PIANO2 and E.PIANO).
O O G CO O "O 6 O
AZZ FULL HARPSI
PIANO] PIANO2 E.PIANO CLAVI PE ORGAN CHORD CHORUS
ETEA Fay
L LOWER.
(3) The LEDs above the CHORUS and PIANO 1 switches should then
start flashing to indicate that the piano is in the programming mode.
In this mode, striking the keyboard produces no sound.
(4) Press a TONE SELECTOR switch or the SPLIT switch to select the
desired programming mode.
The correspondence between switches and 8 types of programming
mode is as below:
O O O
a E
PIANO? PIANO2 EPIANO CLAVI oi ORGAN SPLIT
e
"Choosing a Touch Curv
ees
SOK Co AOL on/ott Changing the SPLIT Point
Setting MIDI channel
MULTI TIMBRE on/off
Sending a program number
B.Leaving the programming mode
(1) Press the CHORUS switch.
(2) The flashing will stop, and you will return to the timbre in effect
when you entered the programming mode.
«Note: You can also continue into another programming mode by
pressing another TONE SELECTOR without pressing the
CHORUS switch.