Advertisement
Model:
TG1FRI-1S
STANDARD FEATURES
DESIGN
• True's solid door roll-in's are designed
with enduring quality that protects your
long term investment.
• Designed using the highest quality
materials and components to provide the
user with colder product temperatures,
lower utility costs and exceptional food
safety.
REFRIGERATION SYSTEM
• Factory engineered, self-contained,
capillary tube system using
environmentally friendly (CFC free) 404A
refrigerant.
• Extra large evaporator coil balanced
with higher horsepower compressor and
large condenser maintains -10°F (-23.3°C)
cabinet temperature.
• Sealed, cast iron, self-lubricating
evaporator fan motor(s) and larger fan
blades give True roll-in's a more effi cient
low velocity, high volume airfl ow
design. This unique design ensures
faster temperature recovery and shorter
run times in the busiest of foodservice
environments.
• Top mounted refrigeration system with
evaporator positioned out of food zone
to maximize capacity.
• Automatic defrost system time-initiated,
temperature-terminated. Saves energy
consumption and provides shortest
possible defrost cycle.
• Automatic evaporator fan motor delay
during defrost cycle.
PLAN VIEW
ELEVATION
WARRANTY
One year warranty on all parts
and labor and an additional 4
year warranty on compressor.
(U.S.A. only)
2001 East Terra Lane • P.O. Box 970 • O'Fallon, Missouri 63366 • (636)240-2400 • Fax (636)272-2408 • (800)325-6152 • Intl. Fax# (001)636-272-7546 • www.truemfg.com
TG Series:
Roll-In Solid Door Freezer
CABINET CONSTRUCTION
• Exterior - 300 series stainless steel
door and rainshield. Anodized quality
aluminum sides, back and bottom.
• Interior - NSF approved white aluminum
sides walls and back liner. 300 series
stainless fl oor with coved corners.
• Insulation - entire cabinet structure and
solid door are foamed-in-place using
high density, CFC free, polyurethane
insulation.
• One (1) heavy gauge stainless steel ramp.
• Designed to accept roll-in racks (inboard
castors) with maximum dimensions of
27"L x 29"D x 66"H (686 mm x 737 mm x
1677 mm).
DOOR
• 300 series stainless steel. Door opens
within cabinet dimension.
• Door lock standard.
• Lifetime guaranteed recessed door
handle. Door fi tted with 12" (305 mm)
long recessed handle that is foamed-
in-place with a sheet metal interlock to
ensure permanent attachment.
• Wiper gaskets for positive seal, reversible.
• Three (3) lifetime guaranteed, cam-lift
hinges. Full 180° open capability with a
stay open feature at 120°.
• Magnetic door gasket of one piece
construction, removable without tools for
ease of cleaning.
• Door is fi eld reversible.
1"
1
4
(26 mm)
(108 mm)
3
83
/
"
4
(2128 mm)
3
84
/
"
4
(2153 mm)
METRIC DIMENSIONS ROUNDED UP TO THE
NEAREST WHOLE MILLIMETER
SPECIFICATIONS SUBJECT TO CHANGE
WITHOUT NOTICE
TRUE FOOD SERVICE EQUIPMENT
11
38
/
"
16
/
"
4
(983 mm)
RIGHT VIEW
Model
KCL
TG1FRI-1S
LIGHTING
• Incandescent interior lighting, safety
shielded.
MODEL FEATURES
• Exterior digital temperature display,
available with either °F or °C display.
• Evaporator epoxy coated to eliminate the
potential of corrosion.
• Backguard improves airfl ow.
• Minimum wattage heater in cabinet
frame.
• Interior bumpers protect cabinet walls
from abuse caused by roll-in carts.
• NSF-7 compliant for open food product.
ELECTRICAL
• Unit completely pre-wired at factory and
ready for fi nal connection to a 115/60/1
phase - 15 amp dedicated outlet. Cord
and plug set included.
115/60/1
NEMA-5-15R
OPTIONAL FEATURES/ACCESSORIES
Upcharge and lead times may apply.
❒ Metal door handle (factory installed).
❒ Electronic temperature control (factory
installed).
❒ Correctional facilities options.
❒ Remote cabinets (condensing unit
supplied by others; system comes
standard with 404A expansion valve and
requires R404A refrigerant). Consult
factory technical service department for
BTU information.
35"
(889 mm)
34
(875 mm)
30"
(762 mm)
PLAN VIEW
Elevation
Right
Plan
TFQY51E
TFQY64S
TFQY51P
7
/
"
16
7
64
/
"
16
(1637 mm)
3D
TFQY643
Advertisement
