System Overview; Optogenetics-Led Controls - Prizmatix Optogenetics-LED User Manual

Prizmatix

3.3 System Overview

3.3.1 Optogenetics-LED Controls

The front panel of Optogenetics-LED unit features: (1) SMA connector for optical fiber, (2)
10 turn dial of precision potentiometer for manual setup of output power, (3) LED Enable
(ON/OFF) switch.
Optogenetics-LED front panel
The back panel of Optogenetics-LED unit features: (1) Power adaptor input socket, (2)
Main power switch, (3) Connector for Analog input (0-5V) for control of LED power from
computer, (4) Toggle switch Analog Input Int/Ext to enable control of LED power by
external analog input, (5) Connector for TTL input, (6) Toggle switch TTL Input Int/Ext to
enable control of LED ON/OFF by external TTL signal
Optogenetics-LED back panel
CAUTION!:
Do not use the illuminator without the Optical Fiber
connected to SMA port!
7 | P a g e Optogenetics-LED User Manual