Page 1
Prizmatix USER MANUAL UHP-F Light Guide Coupled LED for Microscopy and Various Scientific Applications Version: 5 Main Office European Sales Office North America Sales Office Phone: +972-27-2500097 Phone: +44 (0) 77-9172-9592 Phone:+1 - (248) - 436-8085 Fax: +972-27-2500096 Fax: +44 (0) 20-7681-2977...
UHP-F Illuminator Controls ................8 3.3.2 Typical System Setup ..................9 Initial Set-up of UHP-F illuminator ............... 9 Set-up of UHP-F illuminator with CTRL-F or UHP-F-USB (-RS232) ..... 11 Cleaning ......................12 P a g e UHP-F LED Illuminator User Manual...
Prizmatix 1 Introduction Prizmatix UHP-F-LED series of Ultra High Power LED Light Guide coupled light sources was designed especially for illumination applications in Microscopy, life science instrumentation, and many others. The UHP-F-LED housing is self-contained light source including all necessary driver electronics and thermal management. The illuminator comprises a single die high power LED coupled to light guide connector where the flexible optical light guide is connected.
The UHP-F illuminator is assigned to following risk groups according to IEC 62471: 2006. The assignment done based on the standard system configurations: (a) UHP-F connected to Liquid Light Guide 3 mm core, (b) UHP-F connected to Liquid Light Guide 3 mm core. The assignment results are summarized in Table 1.
3 Set-up of the Device Remove the device from the packaging and inspect the device for loose components or any signs of damage. Notify Prizmatix if the device appears damaged in any way: do not install or operate a damaged device.
Operating relative humidity <90 (Non-condensing) Dimensions See drawing below Head weight 1250 Power adaptor dimensions (L x W x H) 167 x 240 x 35 Power adaptor weight Power Adaptor Safety P a g e UHP-F LED Illuminator User Manual...
TTL Input Int/Ext to enable/disable control of LED ON/OFF by external TTL signal Illuminator back panel CAUTION!: Do not use the illuminator without the Light Guide connected to Light Guide port at the illuminator! P a g e UHP-F LED Illuminator User Manual...
Prizmatix 3.3.2 Typical System Setup Typical UHP-F illuminator setup for microscope will include following components: (1) UHP-F illuminator - Light Guide coupled LED light source (2) Liquid Light Guide - Light guide to deliver the light to microscope (3) Microscope adaptor - Enable connection of the light guide to the light port of the...
Page 10
Analog Input control change the position of the Ain Int/Ext switch to Ext position CAUTION!: Do not cover back panel of unit - ensure that air can circulate freely. 10 | P a g e UHP-F LED Illuminator User Manual...
Prizmatix 3.5 Set-up of UHP-F illuminator with CTRL-F or UHP-F-USB (-RS232) The UHP-F illuminator and its optional control units (CTRL-F, UHP-F-USB or UHP-F- RS232) can be assembled on microscope or at other illumination setup in several various configurations as described in following figures.
Do not try to clean inside the port – you may damage the illuminator! The box can be wiped with mild wet-wipes. CAUTION!: Do not attempt to use chemicals, e.g. Alcohol or Acetone – you may damage plastic components 12 | P a g e UHP-F LED Illuminator User Manual...
Need help?
Do you have a question about the UHP-F and is the answer not in the manual?
Questions and answers