Introduction; Features; Intended Use; Safety - Prizmatix Optogenetics-LED User Manual

Prizmatix
1

Introduction

The Prizmatix Optogenetics-LED module is specially designed to provide high power Light
to activate opsins in Optogenetics experiments with freely moving mammals. This LED
light-source provides powerful light pulses triggered by external TTL input.

1.1 Features

• High Power
• Reciprocal SMA fiber connection
• Precisely adjustable power by 10 turns potentiometer
• TTL external modulation input (up to 50KHz)
• Analog input (0-5V) for power control
• TTL and Analog Inputs are Optically Isolated

1.2 Intended Use

The Optogenetics-LED is an in-vivo illuminator designed to be used with free-moving small
animals inside maze systems. The unit is self-contained. The LED light exits through an
SMA ferrule directly to an attached 1000um POF, which is connected to a rotary joint. On
the other side of the rotary joint is a 500um POF which shall be connected to the
implanted cannula in the animal.

2 Safety

Please make yourself familiar with the contents of these operating instructions before
using the Optogenetics-LED system. Use the illuminator only as specified in this manual.
Otherwise, the protection provided by the illuminator may be impaired.
The following symbols are used for the warnings:
CAUTION!
CAUTION!
Do not use the illuminator if it is damaged. Before you use the illuminator, inspect the
case. Look for cracks or missing parts.
Do not use the device around explosive gas.
Never operate the illuminator with the cover removed or the case open.
Any maintenance should ONLY be performed by a Prizmatix authorized technician.
3 | P a g e
Failure to comply with the safety instructions can be hazardous to
the user.
Failure to comply with the safety instructions can result in
damage to the instrument.
Optogenetics-LED User Manual