Advertisement
•
•
•
Errors:
(bank not initialized)
(device not present)
(invalid checksum)
(bad parameter)
Transferring Files (COPY)
There are three categories of this command:
o
Transferring files from the HP-75 to the PMS.
o
Transferring individual files from the PMS to the HP-75.
o
Transferring a complete bank from the PMS to the HP-75.
Transferring Files From the HP-75 to the PMS •
I
COPY ['filename'] TO '[filename]:device'
This command will copy a specified file from the HP-75 memory into
the
PMS.
If the destination file name is not specified, the
source file name will
be
used. If the source file name is not specified, the current edit file will be
copied.
At least
one
of the
files, however, must be named.
(If a program
in the HP-75
has the same name as a program in the PMS, only the program in
the HP-75
can be run.) A bank must be empty before a ROM file is copied into
it. If a ROM file is copied into a bank, the ID number of the ROM
file
will
become the bank ROMID number. You may copy a maximum of eight files plus one
LEX file into a bank.
Examples:
COpy 'TEST' TO 'T1:ROMA'
COpy 'R1' TO ':romd'
Copies Test file
from
the HP-75
to
bank A and renames it
T1.
Copies R1 file from the HP-75 to bank
D under the same name.
15
Advertisement
