Internal Access And Connection - IBEX Nox S User Manual

Internal Access and Connection

1. Remove 2 x M5 cap screws and glass clamps to open lid, feed
power cable through cable gland, connect cable ends to the
correct terminals, tighten cable gland, ensure all internal wiring
is internally contained, close lid and re-tighten cap screws.
2 x M5 Phillips pan head cap screws
Tighten to 6 Nm
M20 cable gland
Tighten to 4 Nm
6 mm
2.5 mm^2
30 mm
4
3-position terminal block
L
N
E