Related Manuals for IBEX Nox S
Summary of Contents for IBEX Nox S
-
Page 1: Table Of Contents
U S E R M A N U A L Nox S Street Light Contents Foreward Safety Warnings Product Information Product Dimensions Mast-Arm Installation Post-Top Installation Internal Access and Connection Version 1.0... -
Page 2: Foreward
Safety Warnings Please follow these safety guidelines to ensure your LED fitting functions correctly. Ibex warranty does not cover problems or damages that occur as a result of mishandling or from non- compliance with these instructions. -
Page 3: Product Information
Product Information Item Power Voltage Net Weight Sail Area (max) (max) NSS.XX.XXX.XX.XX.XX.XXX. 85 W 220-240V 6 KG 0.056m^2 50/60Hz Maximum installation height is 15 m. Product Dimensions (mm) -
Page 4: Mast-Arm Installation
Mast-Arm Installation Loosen 2 x M10 hex grub screws, feed power cable through spigot and cable gland, adjust alignment and tighten screws. Adjust throw by loosening 2 x M8 cap screws, adjust in reference to markings and tighten screws. 2 x M8 Hex socket cap screws Tighten to 10 Nm 2 x M10 Hex socket grub screws 2 x M10 half lock-nuts... -
Page 5: Internal Access And Connection
Internal Access and Connection Remove 2 x M5 cap screws and glass clamps to open lid, feed power cable through cable gland, connect cable ends to the correct terminals, tighten cable gland, ensure all internal wiring is internally contained, close lid and re-tighten cap screws. 2 x M5 Phillips pan head cap screws Tighten to 6 Nm 3-position terminal block... - Page 6 Thank you.