Advertisement
ISpeaker
Speaker
system
system
"0 dB" (Center position)
(Left)
(Right)
—
K
es
aa:
2
Recommended
=e
microphone:
RP-3800E
(sold separately)
Use the band level controls to adjust the frequencies
displayed on the spectrum analyzer so that they are
all at the same level.
Make the adjustment so that the band level controls are
centered around the ''0 dB" position and are not set too
far in either the '+ dB" or ''~ dB" direction.
(After adjustment, the positions of the band level controls
are the ideal listening point.)
(Position the microphone at the same place
and height as it was for the measurement.)
J
80250
00 Wk
ak
Frequency (Hz)
Frequency (Hz)
Depending
on the listening
room,
it is not always possible to obtain a perfectly flat response
for equalization correction.
When
making the correction adjustment, the spectrum
analyzer display may not always visually agree with the positions of the band level
controls.
<Microphone to be used with this unit>
response
displayed
on the spectrum
analyzer may
differ from the actual sound field frequency response.
Advertisement
