Denon DCD-1500 Operating Instructions Manual page 9

@ Output terminal (QUTPUT) @ Sub code output terminal
® Connect the output terminal to the (SUB CODE OUT)
input terminal of the amp. ® This output terminal will enable the more
(Refer
to page 9 for details
on con-
effective use of the compact
disc player
nections.) in the future.
CONNECTION
(1) Connect the accessory pin cord to the out- (2) Connect the power cord to a power outlet.
put terminal of the player (to R= (right) If your amp or other equipment has a power'
and L (left) of OUTPUT), and to the AUX, supply outlet, the power cord may be con-
TUNER, or TAPE
PLAY of the input
nected there. Refer to the operating manual
terminal of the amp (to R and L).
for the amp or equipment to make sure that
There are two output terminals: a variable the capacity of the power source is sufficient.
output terminal (VARIABLE), and a fixed
output terminal (FIX). When the output
level is to be varied using the remote control,
the VARIABLE terminal must be con-
nected.
DCD- 1500
Power supply outlet
DAD TAPE
(AUX) TUNER REC PLAY |
® © ©r-@ A
AC OUTLET
Connection Precautions:
@ Turn the power switch of each unit OFF before connecting or disconnecting the pin cord.
@ Make certain that the R plug of the pin cord is connected to the R jack of the player or amplifier,
and that the L pin plug is connected to the L jack.
@ Connect the amp to DAD (AUX), TUNER, or TAPE PLAY.
@ Make certain that the pin plugs are inserted all the way in to prevent loose connections.
| OPENING AND CLOSING THE DISC HOLDER AND LOADING A DISC |
Opening and closing the disc holder (If the power is turned OFF, the disc holder will not operate.)
@ Press the power switch (POWER) to turn on
the power supply.
@) Press the disc holder open/close button (
OPEN/CLOSE).
Disc holder
open/close button
Caution: Do not hit the button with a pencil, etc.