Denon DCD-1500 Operating Instructions Manual page 8

@ Play Button (> PLAY)
@ Press this button to play a disc.
@ When the PLAY button is pressed, the
indicator lights, and the
number of the track being played, the
index number, and the elapsed playback
time for that track are displayed. The
calendar lights to display the all of the
playback tracks. The displayed tracks
then go out in order as each finishes
playing.
@ When playback of the last track has
finished, the indicator goes
out, and the machine enters stop state.
@ It is also possible to use the PLAY
button to close the disc holder after a
disc has been inserted. Playback then
begins.
Pause Button (I] PAUSE)
@ Press this button to stop the playback
_ temporarily.
® \|f the PAUSE button is pressed during
playback, the play is stopped temporarily, —
the PLAY lamp goes out, and the PAUSE
lamp lights.
@ To end the pause, push the PLAY key
@.
Stop Button (= STOP)
@ Press this button to stop the playback.
@ The rotation of the disc stops, and the
total number of tracks and the total
playback time are read out on the
TRACK NO, and TIME sections of the
display.
@® During programmed playback, the total
number of tracks programmed in me-
mory and the total porgrammed per-
formance time are displayed.
A-B Repeat Button (A — B)
@® Press this button to perform repeated
playback of a desired section between
two specified points.
(Refer to page 13 for details.)
Repeat Button (REPEAT)
© Press this button to repeat playback.
@ When the REPEAT _ button is pressed,
the REPEAT indicator lights and
repeated playback is performed for ail
of the tracks on the disc. During pro-
arammed olavback. all of the tracks
Press the REPEAT button again to cancel
the repeat operation.
Call Button (CALL)
@ Press this button to verify the. track
numbers that have been programmed
into memory.
Time Mode Button (TIME MODE)
@ This button is used to select the type of
information to be read out under the
TIME section of the display. Either
the elapsed playback time of the current
track, the remaining playback time for
that track, or the playback time for the
remaining tracks on the disc can be
selected.
Normally the elapsed playback time of
the current track is displayed. If the
button is pressed once, the
indicator lights and the remaining time
left to play on the track is displayed. If
the button is pressed again, the
[ SINGLE |Jindicator goes on, and the
[TOTAL indicator goes on, and the
playback time for the remaining tracks
left on the disc is displayed. If the but-
ton is pressed once more, the
indicator goes out and the display returns
to the elapsed playback time for that
track.
If the button is pressed so that the
TOTAL (Indicator lights during pro-
grammed
playback,
the playback
time
for all of the remaining programmed
tracks is displayed.
Clear Button (CLEAR)
© Press this button to correct the program-
med contents of memory.
Timer Button (TIMER)
@ This button is used in conjunction with
an audio timer to perform timer play-
back at the specified time. .
Volume adjustment knob
@ This knob is used to adjust the output
level (volume) of the headphone jack.
Headphone Jack (PHONES)
@ When using headphones, please listen to
them at an annronriate volume