Denon DCD-1500 Operating Instructions Manual page 7

PAUSE PLAY
indicator indicator
indicator
LS
@
7)
DISC load
indicator
Remote controller
signal receive
TRACK NO. INDEX
REPEAT
indicator
A-B repeat
indicator
OVER indicator
for recorded tracks
{Discs with more
Program than 21 tracks)
indicator Calender
Displays the total
Playback time of
the remaining tracks
to be played
Displays the
remaining playback
time for the
current track
Remote Control Photosensitive Window
@ This window receives the light trans-
mitted from the wireless remote control
unit.
@ The RC-1500 wireless remote control
unit should be operated while it is point-
ed in the direction of the photosensitive
window.
@ When the remote control is operated,
the remote control sensor indicator
lamp will light in the display area @.
Fast Reverse Skip Button (<4)
@ Press this button to move playback in
fast reverse.
@ When the machine is in play, sound will
be porduced during the time that the
button is being pressed and the fast
reverse is operating.
@ If the button is pressed while the ma-
chine is in the pause state, the fast
reverse will operate three times faster
than the reverse speed when the ma-
chine is in the play state. No sound will
be produced.
Fast Forward Skip Button (>>)
@ Press this button to move playback in
forward.
@ When the machine is in play, sound will
be produced during the time that the
button is being pressed and the fast
forward is operating.
@ |f the button is pressed while the ma-
chine is in the pause state, the fast for-
ward will operate three times faster than
the fast forward speed when the machine
is in the play state. No sound will be
Track Button (kK)
@ Press this button to move the pickup,
forward and advance to the beginning of
the desired track.
@ if the TRACK button is pressed during
playback or pause, the pickup moves
forward to the beginning of the track
that corresponds to the number of times
the button was pressed.
Track Button (PJ)
@ Press this button to move the pickup
backward, to return to the pealniing of
the desired track.
@ {if the TRACK button is pressed during
playback or pause, the pickup moves
back to the beginning of the track that
corresponds to the number of times the
button was pressed.
Index Button (INDEX)
@ Press this button to begin playback at an
index number within a track.
@ Select the desired index number by using
the ten-key pad.
(Refer to page 15 for details.)
Program and Direct Button
(PROGRAM & DIRECT)
@ Press this button to select the memory
program function or direct track selection
function.
(Refer to page 12 for details.) _
+10 Button (+10)
@ Press this button to select a track number
that is larger than 11.
@® The +10 button is used in conjunction
with the ten-key pad @®). For example,
to select track number 15, press the[+10]
button and then/[5] on the ten-key pad.
® Similarly, to select track number 32,
press [+10],[+10],[+10] and then press [2].
Ten-key Pad
@ These buttons are pressed for direct track
selection or to program a selection into
memory. For example, to play back the
third track using the direct selection
function, press on the key pad. Track
number 3 will then start to play. To
play track number 12, press [+10] and
then