Denon DCD-1500 Operating Instructions Manual page 12

3) Returning to the beginning of the current track during playback ...........-.. .| Quick selection |
DENON sraae nomnost Lounae! mi nae
Press the track reverse button (fq).
S
a |
"
Pose
(i)
Press the track reverse button ( Kd).
Earp
a. ae
@ The track reverse button can be pressed during ary | CEE] CC] Cae .
7
.
oISC PROG. | 1 +o 516
[7 fale 10
the search operation for a selection, to forward onemare] over |r [ez fra ral w [ r e f || 0 [20
the disc to the beginnings of preceding tracks
in sequence.
4 ) Playing several tracks in the desired order ......-... 20. eee eee eee eee Program selection
@
A desired track can be selected from those recorded on the disc, and tracks can be programmed to
be automatically played back in a desired order.
® Programming can be performed for a maximum of 20 tracks.
(1) Programming (2) Confirming a programmed track
(PROGRAM & DIRECT) |
is pressed, the lamp lights. Use
the ten-key pad and the button to
select the tracks to be programmed into
memory. For example, to program the
3rd track, the 12th track, and the 7th
track into memory:
Press the following buttons: | PROGRAM&
DIRECT],[3],[+1!0],[2],[7]. For each speci-
fied track, the calendar will light to
display the track, the track number will
be displayed under TRACK NO., the
number of tracks programmed into
memory will be displayed under INDEX,
and the total playback time for the
programmed tracks will be displayed
under TIME.
The | OVER | indicator will light if a disc
is loaded that has more than 21 tracks
recorded on it.
More than 21 tracks cannot, however, be
programmed into memory. The/ OVER |
(CALL)
@ Press the call button (CALL).
Press the call button successively to
display the programmed contents of the
memory in order.
(3) Correcting the programmed contents of
memory
@ To correct a track number programmed
into memory, push the CLEAR button
and then enter the correct track number.
The last programmed track will be
changed to the correct track.
To erase a track number during pro-
gramming, call that track number using
the CALL button, and then press the
CLEAR button to erase it.