Table of Contents
Advertisement
10
CHAPTER
1
General Guide
@ Connector for Peripherals
Connect peripherals, that are available separately on an optional basis, to this
connector, Connect the FP-12S or FP-40 when printing, and connect Cassette
Interface FA-5 when using a tape recorder,
po
©
Use the separately available exclusive cable SB-2 when connecting to FP-12S,
and the separately available interface pack SB-42 when connecting to FP-40.
Do not connect devices other than SB-2, SB42 and FA-5S to this connector.
Always keep the connector covered' with the accessory cover when not using
the optional devices.
@ RESET Button
This button is located below the power switch. If this button is pushed with a
pointed object when the power is on, the computer will be reset to the state
where no specification or no input is performed. This operation may be used
when the computer is in locked state due to strong static electricity. Caution is
required since all programs and data will be lost if pushed.
cx
LLLLLLELLLL
Leemw _ pE_ut
goebe coco
FOC OCoeeLLLEL
e*LoOoL
LEL
'—RESET Button
1-3 Power Supply
Note:
Be sure to replace the batteries every two years regardless of their use in order to
prevent the chance of malfunction due to battery leakage.
= Battery, Replacement
2) Remove the batteries.
Main batteries:
t
~
Remove the battery cover after loosening
Screws
the screw @.
Auxiliary battery:
2.
Q
ELLIO)
Remove the battery cover after loosening
the screw ®.
4) Wipe the surfaces of new batteries well'
with a dry cloth before inserting them with
I
the @ side up.
Screw @ Screw ®)
og"
(Ol _JL_Jo}
fe
11
Advertisement
Table of Contents
