Table of Contents
Advertisement
8-3 Displaying the Data Contents
8-4 Correcting Data
To confirm the input data, display the data contents for the ten people now
Assume that the contents of the DATA BANK were displayed with the LIST#
stored. Specify the RUN mode by pressing (aj).
;
command
and, upon checking, it was found that the telephone number of
=
—
JONES' in Record 4 was wrong:
e312)
Re
a
ie
wis
Wrong 052-031-6211
> Correct 052-031-6221
In this cases, specify the MEMO IN mode and correct the data with the follow-
ing procedure.
This enables checking of any input data errors.
If the MEMO IN mode is specified with the @JS) keys, the record number next
to the last record stored will be displayed (record number 11 in this case). Press
the
key to display the data in Record 1 in this state. The record number will
then advance each time the &4 key is pressed.
216
217
Advertisement
Table of Contents
