Table of Contents
Advertisement
Locking function
The accessories can be pulled out approximately
halfway until they lock in place. The locking function
prevents the accessories from tilting when they are
pulled out. The accessories must be inserted into the
cooking compartment correctly for the tilt protection to
work properly.
When inserting the wire rack, ensure that the lug ‚ is
facing downwards.
When inserting baking trays, ensure that the lug ƒ is at
the rear and is facing downwards. The sloping edge of
the accessory „ must be facing towards the appliance
door.
Changing the shelf position for the
telescopic rail
Bars and telescopic rails can be positioned in any
order. For example, you can fit the telescopic rail to the
shelf position which you use the most frequently.
Removing the bar
Telescopic rails are removed and fitted like bars.
Push the bar towards the back ‚ until it can be
1.
pulled out upwards ƒ (Fig.
Unhook the bar at the back and remove it (Fig.
2.
Fitting the bar
Fit the bar at the back (Fig.
1.
Push the bar towards the back ‚ and down ƒ onto
2.
the pin „ (Fig.
).
"
Ensure that the hook is hooked onto the pin „
3.
(Fig.
).
#
Accessories en
).
!
).
"
).
!
11
Advertisement
Table of Contents
