Table of Contents
Advertisement
Chapter 3
Adjusting Volume
Volume control: press the
control or the corresponding buttons on the TV set to
increase or decrease the volume.
Sound mute: press the
the sound. Press this button again or the
restore the sound.
Installing Channels
This section describes how to search and store
channels automatically. This may be done in either of
the cases below:
- you are prompted that there are no channels in TV
mode;
- you want to update your channels.
1. Press
on the remote control and select
(Settings) > Channels & Inputs > Channels >
Channel Scan. Press OK/Right to enter.
2. The TV installs and arranges channels according
to your country or region. Press Up/Down to select
Country/Region, and press OK to enter. Enter
the password you have set in the
System > Parental Controls menu. Press Up/
Down to select your country or region and press OK
to confirm.
3. Press Up/Down to select Scan Automatically and
press OK to enter.
4. Press
Up/Down
to select Channel Type and
press
Left/Right
to select Digital, Analog or
Digital&Analog.
5. After configuration is completed, press Down to
select Search and press OK to start scanning
channels.
6. The channel search may take a few minutes. After
the automatic search, channels are arranged in a
preset order. If you wish to hide or move channels,
press
on the remote control, select
> Channels & Inputs > Channels > Edit Channels
and press OK to enter.
If the channel search retrieved only the analogue
Note:
channels it could be caused by poor broadcasting and
therefore is not covered by manufacturer warranty.
Manufacturers cannot be held responsible for lack of or
poor broadcasting in some areas.
Accessing Channels
Using the Up/Down buttons: press the Up/Down
buttons on the remote control to scroll through the
channels.
Using the OK button: press the OK button to display
the freeview bar and press Left/Right and OK to enter.
Using the P+/P- buttons: press the P+/P- buttons on
the remote control to scroll through the channels.
/
buttons on the remote
button to temporarily mute
button to
(Settings) >
(Settings)
Basic TV Operations
Using the
button: press
remote control keyboard, then you can use the numeric
buttons or the List button to operate accordingly.
Using Settings Menu
Allows you to not only adjust settings, such as picture,
Network & Internet, Accounts & Sign-In and Apps, etc.,
but also set preferences.
1. Press
on the remote control to display the
.
dashboard menu
2. Select
(Settings) and press OK to enter the
settings menu.
3. Press Up/Down to select the desired item and press
OK to enter the corresponding submenu.
4. In submenus, press Up/Down to select menu
options, then press OK to enter the option list or the
corresponding submenu, or press OK to toggle on or
off, or press Left/Right to adjust the setting.
5. Press
to return to the previous menu.
Using Subtitles
You can enable subtitles for each TV channel. Subtitles
are broadcast via Teletext or DVB-T digital broadcasts.
With digital broadcasts, you have the additional option
of selecting a preferred subtitle language.
Notes:
- Subtitle can also be enabled by pressing
the remote control to display the virtual remote control
keyboard and select Subtitle directly.
- Some options are available only when Subtitle is set
to on.
Turning On/Off Subtitles
1. Press
on the remote control, select
> Channels & Inputs > Channels > Subtitle and
press OK/Right to enter.
2. Select the Subtitle option and press OK to toggle
between on and off.
3. Press
to return to the previous menu.
Enabling Subtitle Languages on Digital TV Channels
1. Press
on the remote control, select
Channels & Inputs > Channels > Subtitle > Digital
Subtitle Language 1st and press OK/Right to enter.
10
to display the virtual
button on
(Settings)
(Settings) >
Advertisement
Table of Contents
