Configure the maximum charging current and limitation
while charging from Utility
Default: 50A, 30A
Configure the limitation of discharging current
Default: Disabled (means no limited)
**Parallel application will disable the discharging limitation
Configure the compatibility of AC input source
Default: Utility
Configure fault or overload behaviors
Default: Disabled, Disabled
Specific critical operations
(Password 4743 is necessary)
1.
Reset to factory setting
2.
Erase all logs
3.
Export all logs
4.
Firmware upgrade
Wi-Fi Connection
This unit is equipped with a Wi-Fi transmitter. Wi-Fi transmitter can enable wireless communication between
portable energy storage system and monitoring platform. Users can access and control the monitored
portable energy storage system with downloaded APP. Once Wi-Fi connection successfully, the Wi-Fi icon will
be showed on the LCD.
For quick installation and operation, please refer to Appendix I - The Wi-Fi Operation Guide for details.
Prioritizing Energies Scenarios
(Noted: following demonstrations do not include and calculate the real conversion efficiency of the unit.)
1.
Load supplied from Solar firstly then Battery and Utility
Invalid password, try again
18