Pioneer LaserDisc ELITE CLD-99 Operating Instructions Manual page 19

PICTURE QUALITY ADJUSTMENT (V-DNR 3D)
NOTE:
During play of a CDV's audio part, the selected picture quality settings
for the video part are stored in memory.
@ Picture quality settings are stored in memory until the power cord is
disconnected from the wall socket.
e You can adjust V-DNR 3D settings even when not playing a disc, but
you won't notice the effect of these adjustments until images are
displayed on screen.
e Depending on the disc and the scene, it may be difficult to see the Y-
NR, C-NR noise reduction effect, 3D Y/C cross color reduction, and
sharpening of edges with Sharp.
WATCHING A MOVIE DISC - FILM MODE
Press FILM MODE on the front panel.
Vly
-Oo-
7a.
The FILM MODE indicator will light.
Set to ON in accordance with your tastes, particularly when
viewing movie discs.
When the film mode is ON:
@The display in the front panel display window turns off (can be
turned on/off using the FL OFF).
@The screen display (see page 25) does not function.
Ordinary play with only the picture stopped.
Still with Sound Playback
With the Still with Sound Playback function, you can stop the
video image and display a still frame while continuing to listen to
normal playback of the audio part.
STROBE
During normal playback, press
STROBE when the desired scene
appears on the screen.
Strobe Motion Playback
With the Strobe Motion Playback function, the still frame displayed
using the Still with Sound Playback function is replaced with
After pressing STROBE, press
STROBE.
The still frarmes shown on the screen are replaced in sequence
according to the selected replacement interval, while the audio
continues as normal.
© With pictures of still images, Y-NR and C-NR are OFF, regardless of
settings, and 3D Y/C is set to minimum. Which means that adjust-
ments for still images will change setting values (displayed values)
but not picture quality. (CAV disc Y-NR, C-NR, Sharp are also effective
for still images.)
@ When you set V-DNR 3D to STANDARD OFF, adjustments are not
possible, but pressing the Select button displays settings for two
seconds.
eThe screen is blacked (blanked) while changing disc sides.
e@ The TOC is not read, in order to shorten the side-changing time
as much as possible. As a result, random playback cannot be
performed, even when the discs contain TOC codes. In.addition,
the remaining time ABS time and total time displays will not
function. (These displays will function normally if the disc is
played back once before using the film mode.)
@Press the Film Mode button once more to switch OFF.
NOTE:
When the film mode is ON, the display in the front panel display
window will not appear even when the power is turned on. In
addition, the player memorizes the ON/OFF condition of the film
mode even if the power is turned off, so the display will remain off the
next time power is turned on. To turn the display on again, press FL
OFF.
The screen is frozen at the current frame and the audio continues
playing.
To resume normal playback:
Press PLAY >.
By repeated pressing of STROBE, one of four diffrrent
replacement intervals can be selected.
Screen ;
= [ee
STROBE Still
1/990 Every 3 seconds
Every second
Every 8 frame
Every second
Every 3 seconds
Normal playback is carried out at 30 frames/second.
In order to maintain normal audio playback, faster than nirrnal
playback modes such as x2 are not provided.
To resume normal playback:
Press PLAY >.
19
<VREj 4 39 >
En