Pioneer CLD-900 Operating Instructions Manual page 16

REMOTE CONTROL UNIT FACILITIES
The accessory remote control unit can be used during
playback of both LaserVision discs and Compact Discs.
Some buttons have different functions when used with Laser-
Vision discs and Compact Discs; these buttons appear in the
following colors when used with the two disc modes:
Blue: Function used only with LaserVision discs.
'Green: Function used only with Compact Discs.
Buttons appearing in other colors have same functions with
both kinds of discs.
[WHEN PLAYING BACK VIDEO DISCS]
"4X3 FAST XO» <t SCAN PP
-E—_—_®
a
"£ lisse
SR LaserDise
COMPACT OISC/LASERVISION PLAYER
REMOTE CONTROL UNIT CuU-soa
The actual remote control unit has a slide cover; move it up and
down when using the unit.
L
@ PAUSE ( a )
Press to temporarily halt playback.
To release the player from the pause mode, press once
again.
@ EJECT( m/s )
When this button is pressed, playback is stopped, and the
disc rotation ceases. When pressed once again, the disc
table will open after the disc stops rotating.
16
@) < MULTI-SPEED >
(Standard play discs only)
When the right side (>) of the button is pressed, the video
image will be sent forward at the speed set with the
—MULTI-SPEED + button.
When the left side (<4) of the button is pressed, the video im-
age will be sent backwards (see page 25).
@ <x3 FAST x3
(Standard play discs only)
During the time the right side (x3™) of the button is held
depressed, the video image will advance at three times nor-
mal speed. When the left side (4x3) is held depressed, the
video image will be sent backwards at three times norma!
speed.
@ PLAY >
Press to begin playback.
© <i STILL/STEP I>
(Standard play discs only)
When either the right or left side of the button is pressed, the
video image will be shown as a still picture. Then, each time
thereafter that the right side (I>) is pressed, the image will be
advanced by one frame; each time that the left side (ll) is
pressed, the image will be reversed one frame.
@ << SCAN p>
While right side of the button (>) is held depressed, the
video image will be advanced at high speed.
While left side of the button (44) is held depressed, the
video image will be reversed at high speed.
VDP AUDIO
Use to select the audio channel. When the power is first
turned on, the audio will be reset automatically to both 1/L,
2/R.
When one of the buttons 1/L, 2/R is pressed, the audio
channel corresponding to that button only will be heard. The
other channel will be suppressed, and its indicator on the
player's front panel will go out.
When the STEREO button is pressed, both channels will
return to their original play condition.
NOTE:
¢ Audio reproduction is only possible in the normal play mode.
© When only one audio channel is in use, the sound is still fed to
both audio output terminals (1/L, 2/R).
@ —MULTI-SPEED +
Use to select the playback speed during multi-speed
playback (see page 25).
Numeric buttons
Use when performing search (random access).
@ SEARCH
Use when performing search (random access).
Sc SSPE RTE SEES RES SECT ESETO LL EEE TS EES SES TEE DEST ETI EGE NEE ES IEE PE SEE ESE EN RTE ESN ESS SITES STEGER EES OHS IES ESTES SEN BOISE ISR OR EASE ETT SIE
$05 DSI SPAS ESET ES ES TE TESTS EE HE SEES ESTES EDIRN TE ESE TASES