Set Temperature - catec ZOGLAB HG6000 User Manual

Humidity setting
Set the humidity target value. Please input the target value according to the effective range of the instrument.
Take the control range of 5~95%RH as an example. If the input target value exceeds the valid range, it is an invalid operation.
Target value input method: Click on the "humidity value" area to pop up the target value input interface,
and enter the target value through the soft keyboard.
Please also set the target temperature. When the deviation between the set temperature and the actual temperature
exceeds ±2°C, the equipment will automatically stop humidity control until the temperature is controlled to an appropriate
value. It is recommended that the ambient temperature be controlled at around 25°C±2°C to improve the efficiency of
constant temperature control of the instrument.
Input setting value interface
CHAPTER 3 Operation and Usage
23