Siemens SINAMICS Smart Adapter Compact Operating Instructions Manual page 3

Accessing the drive's Web server Accessing the drive's Web server
After you have established wireless network connection between the Smart Adapter and your PC or mobile
device, access the Web server integrated in the connected drive with one of the following two methods:
• Enter the Web site (https://sinamics.net) in a supported browser.
• Enter the Web site (http://smartadapter.net) and then click "Drive" on the home page of the Smart Adapter.
If you are unable to access the Web server or the Wi-Fi connection between your device and the Smart Adapter is
unstable, change the IP address of the drive and make sure that the IP address does not fall into the range from
169.254.0.0 to 169.254.255.255.
For more information about the connected drive, refer to the relevant Operating Instructions.
Configuring the Smart Adapter Configuring the Smart Adapter
Home page Home page
Configure optional Web access settings (Home page > Configure optional Web access settings (Home page >
• Logging in as administrator
• Changing administrator password
① Display language selection
② Administrator login
③ Mobile device information display
④ Network connection status indication*
⑤ Viewing Smart Adapter information (device name, article number, and
firmware version)
⑥ Viewing drive information (drive name and type)
⑦ Accessing the drive's Web server
⑧ Viewing support information
⑨ Configuring optional Web access settings
* Reconnect the wireless network of the Smart Adapter if the connection is
interrupted.
) )
Note:
1. To configure optional Web access settings,
first log in as an administrator.
2. The Smart Adapter's Web server
automatically logs you out after 15 minutes of
inactivity.
3