Advertisement
2.
When the battery is fully charged, the charging indicator
light will turn solid green. It takes approximately
3–4 hours to fully charge the toothbrush.
Changing the Brush Head
The bristles in the middle of the brush head naturally turn white
after 3 months to remind you to change the brush head.
1.
Pull to remove the old
brush head from the
toothbrush handle.
NOTE: Make sure there is a gap between the brush head and handle.
Troubleshooting
Problem
Toothbrush does
not turn on
Toothbrush turns
off before 2
minutes
Brush head
does not fit on
the toothbrush
handle
Brush head
vibration is weak
If your problem is not listed, please contact Customer Support (see page 15).
Possible cause
The battery level
is low
Overuse
Foreign material in the
hole of the brush head
Foreign material on
shaft of the handle
Wrong brush head
Brush head and handle
not attached properly
The battery level
is low
2.
Firmly insert the new
brush head onto the
toothbrush handle.
Solution
Charge the toothbrush
Charge the toothbrush
Remove or clear the foreign
material
Make sure you are using the
correct brush head for this
toothbrush
Clear any foreign material
and reattach the brush head
Charge the toothbrush
9
Advertisement
