Advertisement
2.
Apply toothpaste to the bristles of the brush head.
[Figure 2.2]
3.
Place the brush head onto your teeth and press
Power/Mode to turn the toothbrush on.
a. Optionally, continue pressing (within 3 seconds)
to cycle through the brushing modes: Clean, Whiten,
Polish, Learning, Soft, and toothbrush off.
b. When the toothbrush is turned off, it will remember
the previously selected brushing mode.
NOTE:
•
Pressing Power/Mode within 3 seconds will change the brushing
mode.
•
Pressing Power/Mode after 3 seconds will turn off the toothbrush.
4.
Proceed to brush your teeth. The toothbrush will
automatically pause at 30-second intervals to remind
you to switch quadrants of your mouth.
a. We recommend using the Bass Brushing Method
(see page 6).
5.
After 2 minutes of brushing, the toothbrush will
automatically turn off.
6.
Rinse the brush head and place the toothbrush in a
cool, dry place.
Charging the Toothbrush
When the battery level is low, the charging indicator light
will flash red when the toothbrush is turned off.
1.
Connect the USB charging cable to the charging port
and plug into a powered wall adapter or USB port. The
charging indicator light will slowly pulsate green.
[Figure 2.2]
8
Advertisement
