Control Panel - Kenmore ELITE 911.49032 Use & Care Manual

BEFORE CALLING FORSERVICE
To save you time and money, before making a service call check the list below
for any problem you may feel you have with the performance of your oven. If
the problem is something you cannot fix, use the Consumer Service Numbers
located at the back of this manual. When making any calls, have the Model
No., Serial No., Repair Parts List, Use and Care Guide and the Date of
Purchase available.
PROBLEM
The display of your
control is flashing "F"
followed by a number
or letter.
Oven and oven control
will not work.
POSSIBLE CAUSE
You have a function
error code.
No power to oven.
The clock is in the
black-out mode.
POSSIBLE SOLUTION
Press the CLEAR/OFF pad.
Let the oven cool for 1
hour and enter an oven or
cleaning operation. If code
repeats, call for service.
Check the circuit breaker or
fuse. Make sure the power
cord is plugged in.
See the "Setting Special
Features" section of this
manual.
Oven temperature
seems inaccurate.
Oven control calibration.
See the temperature
adjustment instructions
following this section.
Oven will not
unlock.
Clean cycle is not finished. Oven temperature must drop
below the lock temperature
before the door will unlock.
Oven light does
not work.
a. Light switch in off a. Check oven light switch
position, on the control panel.
b. Oven light bulb loose b. Check the oven
or burned out. light bulb.
Oven did not clean
or results were poor.
a. Controls were not
set properly.
b. Oven was soiled
heavily.
c. Clean cycle was
interrupted.
a. Check the self-cleaning
section of this manual.
b. Heavy spillovers should
be removed before the
cycle is set. You can also
repeat the cycle after
oven has cooled.
c. The normal clean cycle
should last 4 hours.
Oven rack does not
slide easily.
Racks were left in the
oven during a self-clean
cycle
Wipe the racks down with
vegetable oil.
34